Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£2.00/$2.50

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

£4.68/$5.85

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet in 00 104.4cm in H0
find out more

Hanazono motor bogie top-mounting screw

Hanazono motor bogie top-mounting screw

£0.90/$1.13

Pack contains 1 top-mounting screw
find out more

Lead foil: 150mm x 300mm x 0.125mm

Lead foil: 150mm x 300mm x 0.125mm

£20.40/$25.50

A foded sheet of lead foil, 300mm x 150mm x 0.125mm.

Ideal for modelling tents, groundsheets, capes, shop-blinds and tarpaulins.
find out more

19mm/16-spoke driving wheel x 1

19mm/16-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles.

Diameter of drum is 19mm. 4 feet 9 inches in 00 165.3cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Page:  1  2  3  4   >   >>   View All (48) Page:  1  2  3  4   >   >>   View All (48)

27:1 Gearset 1/8

27:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS01

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series SLIMLINE gears

Markits equivalent MGRS20271

20-series gears have shaft centre distance of 0.290" (7.37mm).

Gearbox MM208 or MM208N for 8.5mm motor-mounting spacing.

Gearbox MM210 or MM210N for 10mm motor-mounting spacing.

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

27:1 Gearset 1/8

27:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS02

Worm diameter 7.1mm : Gear diameter 9.2mm 20-series SLIMLINE gears

Markits equivalent MGRS20272

20-series gears have shaft centre distance of 0.290" (7.37mm)

Gearbox MM208 or MM208N for 8.5mm motor-mounting spacing.

Gearbox MM210 or MM210N for 10mm motor-mounting spacing.

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS03

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series SLIMLINE gears

Markits equivalent MGRS20401

20-series gears have shaft centre distance of 0.290" (7.37mm)

Gearbox MM208 or MM208N for 8.5mm motor-mounting spacing.

Gearbox MM210 or MM210N for 10mm motor-mounting spacing.

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" (Slimline) WHEEL BORE/1.5mm WORM

Ref: SLGS03-S

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series SLIMLINE gears

Markits equivalent MGRS20401N

20-series gears have shaft centre distance of 0.290" (7.37mm)

Gearbox MM208 or MM208N for 8.5mm motor-mounting spacing.

Gearbox MM210 or MM210N for 10mm motor-mounting spacing.

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS04

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20402

SEE ALSO SLGS13

20-series gears have shaft centre distance of 0.290" (7.37mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" (Slimline) WHEEL BORE 2mm WORM

Ref: SLGS04-S

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series SLIMLINE gears

Markits equivalent MGRS20402N

20-series gears have shaft centre distance of 0.290" (7.37mm)

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

50:1 Gearset 1/8

50:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS05

Worm diameter 6.3mm : Gear diameter 14.0mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/50-1

See SLGS10 for 2mm worm

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

60:1 Gearset 1/8

60:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS06

Worm diameter 7.1mm : Gear diameter 13.3mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/60-1

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

60:1 Gearset 1/8

60:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS07

Worm diameter 7.1mm : Gear diameter 13.3mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/60-2

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

22:1 Gearset 2.0mm WHEEL bore/1.5mm WORM bore

22:1 Gearset 2.0mm WHEEL bore/1.5mm WORM bore

Ref: SLGS08-A

This gear wheel does not have a 'boss'

Worm diameter 4.7mm : Gear diameter 6.1mm : Shaft centre distance 4.94mm

Markits equivalent M4GRS-H/22NB-2SNB

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

22:1 Gearset 2.0mm WHEEL bore/2.0mm WORM bore

22:1 Gearset 2.0mm WHEEL bore/2.0mm WORM bore

Ref: SLGS08-B

This gear wheel does not have a 'boss'

Worm diameter 4.7mm : Gear diameter 6.1mm : Shaft centre distance 4.94mm

Markits equivalent M4GRS-H/22NB-2SNB

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

38:1 Gearset 1/8

38:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS09

This gear wheel does have a 'boss'

Worm diameter 4.7mm : Gear diameter 9.9mm

Markits equivalent M4GRS-H/382

A 4H gearset with 7mm centres

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.