Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Mashima 1220D Motor

Mashima 1220D Motor

25.92/29.81

L = 20mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

Romford DeLuxe Crankpin sets (8)

Romford DeLuxe Crankpin sets (8)

7.50/8.63


find out more

Markits gearbox/motor-mount

Markits gearbox/motor-mount

4.80/5.52

Designed for use with motors with 8mm spacing between mounting screws.

(Mashima 12xx series/Hanazono) 8.5mm wide - Romford 20-series gears.
find out more

25 x Standard crankpin fixing washers

2.40/2.76


find out more

Romford DeLuxe Outside Cranks x 2

Romford DeLuxe Outside Cranks x 2

4.68/5.38


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

O-scale (1:43) S & D Figures 001-100 (Retail only)

Scalelink | O-scale (1:43) S & D Figures 001-100 (Retail only)

Page:  1  2  3  4  5  ...   >   >>   View All (110) Page:  1  2  3  4  5  ...   >   >>   View All (110)

Cocker Spaniel - sitting

Cocker Spaniel - sitting

Ref: PHOA001

Price: 2.00/2.30

Unharnessed Mule

Unharnessed Mule

Ref: PHOA002

Price: 5.00/5.75

Grazing Holstein Horse

Grazing Holstein Horse

Ref: PHOA003

Price: 5.00/5.75

Fox

Fox

Ref: PHOA004

Price: 2.00/2.30

Rustic Table & Bench

Rustic Table & Bench

Ref: PHOF001

Price: 4.50/5.18

Pair of Rustic Bench Seats

Pair of Rustic Bench Seats

Ref: PHOF001A

Price: 3.00/3.45

Seated Countryman wearing 'Deerstalker' hat

Seated Countryman wearing 'Deerstalker' hat

Ref: PHOF002

Price: 3.00/3.45

Industrial loco driver.

Industrial loco driver.

Ref: PHOF002A

Price: 3.00/3.45

Dog, begging

Dog, begging

Ref: PHOF003

Price: 2.00/2.30

Standing Man with hands in pockets

Standing Man with hands in pockets

Ref: PHOF004

Price: 3.00/3.45

Woman standing holding handbag

Woman standing holding handbag

Ref: PHOF005

Price: 3.00/3.45

Porter with burst-open suitcase

Porter with burst-open suitcase

Ref: PHOF006

Price: 4.50/5.18

Scalelink | O-scale (1:43) S & D Figures 001-100 (Retail only)

Buy now with PayPal