Product Sections
Main Pages
Best Sellers
Romford DeLuxe Outside Cranks x 2
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.14mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 14mmMarkits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more
Romford DeLuxe Crankpin sets (8)
Romford 16.5mm Axle (1/8" diameter)
Romford Axle-nut screwdriver
Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.
Includes two brass fixing nuts.Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)
This is a milled-brass hornblock for a standard 1/8th inch axle.
It is designed to be used in an etched chassis up to 0.60mm thick. (24/1000 inch).You need 2 per axle.Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.
Includes two brass fixing nuts
