Product Sections

Main Pages

Best Sellers

40:1 Gearset 3/16" wheel bore/2.0mm worm

£10.20/$12.75

This set is designed for 'O'-gauge models.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore

Do you require a wheel, worm & mount? If so, see SLGS11.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

24 x Crank pins for driving wheels

£27.00/$33.75


find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Code 100 No 6 Curved Turnout - Left

Code 100 No 6 Curved Turnout - Left

£30.00/$37.50

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 7 remaining -05/03/2024

For manual operation see SDG651 in Shinohara accessories


find out more

Mashima 1015D Motor

£36.00/$45.00

L = 15mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 35mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.
find out more

Mashima 1624D motor

£42.00/$52.50

L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 44mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.
find out more

1:35 German Markings

1:35 German Markings

£10.50/$13.13

An etched brass, reusable stencil.
find out more

OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Page:  1  2  3   >   >>   View All (32) Page:  1  2  3   >   >>   View All (32)

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

Ref: SWD1

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.

Price: £2.40/$3.00 (Including VAT at 20%)

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Ref: SWD1-6

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..

Price: £6.90/$8.63 (Including VAT at 20%)

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

Ref: SW1212D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm. 3 feet in 00 - 104.4cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

Ref: SW1312D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

Ref: SW1412D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke GROOVED Driving wheel x 1

14mm/12-spoke GROOVED Driving wheel x 1

Ref: SW1412DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Details as SW1412D above but tyre grooved to take rubber tyre

Diameter of drum is 14mm.

THESE WHEELS ARE SOLD SINGLY

Price: £4.32/$5.40 (Including VAT at 20%)

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

Ref: SW1512D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

Ref: SW1612D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

17mm/12-spoke driving wheel x 1

17mm/12-spoke driving wheel x 1

Ref: SW1712D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Release: JUNE 2020.

Diameter of drum is 17mm. 4 feet 3 inches in 00 147.9cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

Ref: SW1816D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

Ref: SW1816DX

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke GROOVED driving wheel x 1

18mm/16-spoke GROOVED driving wheel x 1

Ref: SW1816DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

With groove for fitting a traction tyre - Diameter of drum is 18mm.

THESE WHEELS ARE CURRENTLY UNAVAILABLE

Price: £4.56/$5.70 (Including VAT at 20%)

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins