Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

13mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

13mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£11.40/$14.25

This pack contains 2 x 13mm Scale Link Driving Wheels & 1 x Romford/Markits 00/H0 axle.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£6.00/$7.50

.Limited quantity available 17/06/2025

MAXIMUM 2 PER CUSTOMER.
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£12.00/$15.00

This pack contains 2 x 16mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SEE EBAY LISTING = MAX 5 Packs per Customer.

RESTRICTED TO 5 PACKS PER CUSTOMER.
find out more

22mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

22mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 22mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

2mm (0.80") diameter plastic rod for SLC070B

2mm (0.80

£1.20/$1.50

NOTE: POSTAGE £7.50 + VAT as this is 36cm long unless cut.
find out more

Code 70 No 6 Turnout Right-hand

Code 70 No 6 Turnout Right-hand

£22.50/$28.13

-New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - sold out
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.

Page:   <<   <  1  2  3  4  5   >   >>   View All (49) Page:   <<   <  1  2  3  4  5   >   >>   View All (49)

50:1 Gearset 1/8

50:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS10

Worm diameter 4.7mm : Gear diameter 13.0mm

Markits equivalent M4GRS-H/50-2S

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

Ref: SLGS11

This set is designed for 'O'-gauge models and includes the MM1240 mount and bushes.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore : Centres 12.25mm.

Markits equivalent MM7-1-1140

MAXIMUM ONE SET PER CUSTOMER

Do you just require a wheel & worm? If so, see SLGS11NM or SLGS15.

These are not the same gears as used in SLGS11.

Price: £17.90/$22.38 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" wheel bore/2.0mm worm

Ref: SLGS11NM

This set is designed for 'O'-gauge models.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore

MAXIMUM ONE SET PER CUSTOMER

Do you require a wheel, worm & mount? If so, see SLGS11.

Price: £10.20/$12.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS12

Original Romford Gearset

13.3mm wheel : 7.1mm worm.

Markits equivalent MGRS-401

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2mm WORM

Ref: SLGS13

Original Romford Gearset

13.3mm wheel :7.1mm worm.

Markits equivalent MGRS402

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £7.80/$9.75 (Including VAT at 20%)

30:1 Gearset 1/8

30:1 Gearset 1/8" WHEEL BORE /2.00mm WORM

Ref: SLGS14

Original Romford Gearset

Worm diameter 7.1mm : Gear diameter 13.3mm :

Markits equivalent MGRS301

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £9.12/$11.40 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

Ref: SLGS15

This set is designed for 'O'-gauge models. There is NO MOTOR MOUNT.

Gearwheel 13.40mm - 3/16" bore : Worm 9.6mm - 2mm bore.

MAXIMUM ONE SET PER CUSTOMER

Price: £10.80/$13.50 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM+ NARROW MOUNT

Ref: SLGS16

Markits gearset MM210/20401N

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £16.20/$20.25 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2.0mm WORM+NARROW MOUNT

Ref: SLGS17

Markits gearset MM210/20402N

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £16.20/$20.25 (Including VAT at 20%)

38:1 Gearset 1/8

38:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS18

This gear wheel does have a 'boss'

Worm diameter 4.7mm : Gear diameter 9.9mm

Markits equivalent M4GRS-H/381

A 4H-series gearset with 7mm centres

SOLD OUT - SEE SLGS22

Price: £9.12/$11.40 (Including VAT at 20%)

30:1 Gearset 1/8

30:1 Gearset 1/8" WHEEL BORE /1.5mm WORM

Ref: SLGS19

Original Romford Gearset

Worm diameter 7.1mm : Gear diameter 13.3mm :

Markits equivalent MGRS301

Original Romford gears have shaft centre distance of 0.375" (9.53mm)

MAXIMUM ONE SET PER CUSTOMER

Owing to the current closure of Markits, following Mark's death,

we are currently only supplying these components with a purchase of Scale Link wheels.

When the future of Markits is known, we will review the situation.

Price: £9.12/$11.40 (Including VAT at 20%)

38:1 Gearset 1/8 WHEEL BORE/1.5mm WORM + MOUNT

38:1 Gearset 1/8 WHEEL BORE/1.5mm WORM + MOUNT

Ref: SLGS20

Markits gearset MM-1-85381s

MAXIMUM ONE SET PER CUSTOMER

Suits motors with 8.5mm and 10mm mounting spacings...

SUPERCEDED bySLGS22

Price: £15.48/$19.35 (Including VAT at 20%)

Scalelink |  Sundries = Gear-sets etc NOTE there are some temporary restrictions & conditions.