Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

£60.00/$75.00

This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels

BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).

Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Rover 6hp tourer 1906

Rover 6hp tourer 1906

£18.00/$22.50

(6cv torpedo - Kabriolett)

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs


find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL8 x 1

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Hanazono 12 volt DC 5-pole motor

Hanazono 12 volt DC 5-pole motor

£18.00/$22.50

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Fixings 10mm apart.
find out more

HO/OO' Code 100 Shinohara Rigid Curved Track

Scalelink |  HO/OO' Code 100 Shinohara Rigid Curved Track

Code 100 rigid curve 22

Code 100 rigid curve 22"/559mm radius

Ref: SDG150

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle. Note: This is 13mm less than Hornby 4th radius.

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

ONLY 2 BOXES LEFT = 05/03/2024

By using 24"/610mm radius and above, there should not be a problem with clearances.

Price: £42.00/$52.50 (Including VAT at 20%)

Code 100 rigid curve 24

Code 100 rigid curve 24"/610mm radius

Ref: SDG151

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle.

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

By using 26" radius and above, there should not be a problem with clearances.

ALL GONE

Price: £42.00/$52.50 (Including VAT at 20%)

Code 100 rigid curve 30

Code 100 rigid curve 30"/762mm radius

Ref: SDG154

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle. Note:

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

By using 32" radius and above, there should not be a problem with clearances.

ALL GONE

Price: £57.00/$71.25 (Including VAT at 20%)

Code 100 rigid curve 32

Code 100 rigid curve 32"/813mm radius

Ref: SDG155

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle. Note:

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

By using 34" radius and above, there should not be a problem with clearances.

Sorry - all gone

Price: £57.00/$71.25 (Including VAT at 20%)

Code 100 rigid curve 34

Code 100 rigid curve 34"/864mm radius

Ref: SDG156

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle. Note:

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

By using 36" radius and above, there should not be a problem with clearances.

Sorry - all gone

Price: £60.00/$75.00 (Including VAT at 20%)

Code 100 rigid curve 36

Code 100 rigid curve 36"/914mm radius

Ref: SDG157

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

BOX of 12 = Complete circle. Note:

Note: Hornby is to OO-scale, therefore the increments are 67mm to avoid collisions on the curves

Shinohara is HO-scale and the increments are 51mm.

By using 38" radius and above, there should not be a problem with clearances.

Sorry - all gone

Price: £60.00/$75.00 (Including VAT at 20%)

Scalelink |  HO/OO' Code 100 Shinohara Rigid Curved Track