Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

MG 'TC' Wheels - set of 5

MG 'TC' Wheels - set of 5

£20.95/$26.19

Cast 24mm wheel, 30mm x 5mm tyre, pack of 5

Etched spokes - these wheels are in kit form to be assembled.
find out more

1:76 German Crosses

£3.00/$3.75

See ST1012 for picture

An etched brass, reusable stencil.
find out more

O-scale (1:43) New resin-cast Lorry kits

Scalelink |  O-scale (1:43) New resin-cast Lorry kits

1958 Austin Loadstar tractor & articulated sided trailer

1958 Austin Loadstar tractor & articulated sided trailer

Ref: SLLK01

The first release in this new series.

Resin-cast with vac-formed cab windows and transfers.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £48.00/$60.00 (Including VAT at 20%)

1939 NCB-Smiths Electric Milk Float

1939 NCB-Smiths Electric Milk Float

Ref: SLLK02

This is an O-scale model, cast in resin. A 16-part kit.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £30.00/$37.50 (Including VAT at 20%)

1959 Thames Trader 6-wheel tanker kit

1959 Thames Trader 6-wheel tanker kit

Ref: SLLK03

This is an O-scale model, cast in resin. A 36-part kit. with pre-moulded cab glazing, transfers & etched ladder.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £66.00/$82.50 (Including VAT at 20%)

1959 Thames Trader 4-wheel tipper.

1959 Thames Trader 4-wheel tipper.

Ref: SLLK04

This is an O-scale model, cast in resin. A 28-part resin kit.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £43.20/$54.00 (Including VAT at 20%)

1947-on Leyland Comet Flatbed Lorry kit

1947-on Leyland Comet Flatbed Lorry kit

Ref: SLLK05

Our newest production, this model has 21 parts - They are 3-D printed, Laser-cut or resin-cast.

Featuring a one-piece cab, one-piece chassis with springs, one-piece interior, Push-fit windows,

One-piece body, Detailed wheels, & small parts. Full step by step illustrated instructions.

This kit is an easy-build, well detailed addition to any 0-scale layout.

Available NOW.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £59.95/$74.94 (Including VAT at 20%)

Scalelink |  O-scale (1:43) New resin-cast Lorry kits