Product Sections

Main Pages

Best Sellers

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.68/€5.38

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/€6.90

NEW STOCK - NEW PRICE
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/€6.21

Available again.
find out more

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

£4.80/€5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£1.98/€2.28

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/€5.59

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

OO-scale (1:76) Smiths Components

Scalelink | OO-scale (1:76) Smiths Components

Page:  1  2  3  4  5  ...   >   >>   View All (76) Page:  1  2  3  4  5  ...   >   >>   View All (76)

G.W.R. Lineside Signs

G.W.R. Lineside Signs

Ref: WTSS01

Printed on Quality Card. 4mm Scale only.

Price: £3.60/€4.14 (Including VAT at 20%)

G.W.R. Station Signs

G.W.R. Station Signs

Ref: WTSS02

Printed on Quality Card. 4mm Scale only.

Price: £3.60/€4.14 (Including VAT at 20%)

B.R. Speed/Direction Signs

B.R. Speed/Direction Signs

Ref: WTSS03

Etched in Brass. 2mm & 7mm scale versions available also.

Price: £6.00/€6.90 (Including VAT at 20%)

G.W.R. Signal Box Name Boards

G.W.R. Signal Box Name Boards

Ref: WTSS04

Printed On Quality Card. 4mm Scale only.

Price: £3.60/€4.14 (Including VAT at 20%)

G.W.R. Station Name Board Kit

G.W.R. Station Name Board Kit

Ref: WTSS05

A kit to make the well known G.W.R. station name board, including Brass etched letters, cast support pillars, and backing board. Extra letters available see WTSA10. (Parts for two boards)

Price: £12.00/€13.80 (Including VAT at 20%)

L.S.W.R. Etched Lineside Signs

L.S.W.R. Etched Lineside Signs

Ref: WTSS07

Trackside warning signs, the use of which lasted through S.R. into B.R. times.

Etched in Nickel-Siver. 4mm Scale.

Price: £6.60/€7.59 (Including VAT at 20%)

G.W.R. Etched Trackside Signs

G.W.R. Etched Trackside Signs

Ref: WTSS08

Trackside warning signs, which outlasted the Great Western well into B.R. times.

Etched in Nickel-Siver. 4mm Scale.

Lineside signs are:- Beware of Trains x 4; SW x 4; All up goods mineral trains must stop here x 1;

Catch points 500 yards x 1; Catch points 570 yards x 1.

Price: £6.60/€7.59 (Including VAT at 20%)

S & D Etched Trackside Signs

S & D Etched Trackside Signs

Ref: WTSS09

Trackside warning signs that lasted until the line was closed.

Etched in Nickel-Siver. 4mm Scale.

Price: £6.60/€7.59 (Including VAT at 20%)

G.W.R. Etched Station Signs

G.W.R. Etched Station Signs

Ref: WTSS10

Station signs put the finishing touch to your Great Western station.

Etched in Nickel-Siver. 4mm Scale.

Station signs are:- Passengers must not cross the line x 4; Parcels & cloakroom x 1; Way out> x 1; <Way out x 1;

<To the station x 1; Gentlemen x 2; Vehicles leaving station to use this road > x 1;

Branch train> x 1; <Branch train x 2.

Price: £6.60/€7.59 (Including VAT at 20%)

Smiths Coach Boards - G.W.R

Smiths Coach Boards - G.W.R

Ref: INFO-S1

WTCB01 to WTCB04:

Smiths coach board sets, recaptured in model form the destination boards used on the major routes of the railways of Great Britain. Printed on thin self adhesive card. Black letters on White background unless otherwise stated. Each pack includes an instruction sheet, and ten sets of five different destinations.

WTCB01 = Paddington - Worcester area.

WTCB02 = Paddington - Wolverhampton area.

WTCB03 = Paddington - Bristol area.

WTCB04 = Paddington - Plymouth area.

Paddington - Worcestershire Area

Paddington - Worcestershire Area

Ref: WTCB01

Set of G.W.R. 1930s style coach destination boards.

Price: £3.60/€4.14 (Including VAT at 20%)

Paddington - Wolverhampton Area

Paddington - Wolverhampton Area

Ref: WTCB02

Set of G.W.R. 1930s style coach destination boards.

Price: £3.60/€4.14 (Including VAT at 20%)

Scalelink | OO-scale (1:76) Smiths Components