Product Sections
Main Pages
Best Sellers
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.Romford Axle-nut screwdriver
Available again.
find out more
Markits DeLuxe Crankpin sets (6)
Back in stock
find out more
18mm/16-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 18mm.THEY'RE BACK!!!THESE WHEELS ARE SOLD SINGLYEtched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.Romford 16.5mm Axle (1/8" diameter)
16mm /12-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010.Diameter of drum is 16mm.THESE WHEELS ARE SOLD SINGLY40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM+ NARROW MOUNT
Markits gearset MM210/20401N
find out more
14mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 14mm.THESE WHEELS ARE SOLD SINGLYRomford 16.5mm Axle (3mm diameter)
MRAX-00/3pss stainless 3mm diameter axle for 16.5mm track.
Includes two brass fixing nuts.
