[sd.hide]-->
Product Sections
Main Pages
Best Sellers
Romford Axle-nut screwdriver
.Limited quantity available 17/06/2025
find out more
Markits DeLuxe Crankpin sets (8)
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
RESTRICTION REMOVED for sensible quantites.Markits DeLuxe Crankpin sets (6)
Etched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS18.45mm/16-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: March 2018Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0THESE WHEELS ARE SOLD SINGLY16mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H0Hanazono 12 volt motor bogie 26.0mm wheelbase
Fitted with 12.0mm disc wheels.
BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails) These units must have weight applied to operate successfully.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costsRomford 18.0mm Axle
Includes two brass fixing nuts for EM track For spacing washers see WPY33
RESTRICTION REMOVED for sensible quantites.