Product Sections

Main Pages

Best Sellers

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

26mm/20-spoke Driving wheel x 1

26mm/20-spoke Driving wheel x 1

4.32/4.97

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 26mm.

THESE WHEELS ARE SOLD SINGLY
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

19mm/16-spoke driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles.

Diameter of drum is 19mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

Morris C4 Mk1 Radio Van - Wooden body

Morris C4 Mk1 Radio Van - Wooden body

66.00/75.90

Model built & photographed by Tony Little (Military Modelcraft)

A complete resin/whitemetal kit of this lengthened wireless van with wooden body.

For shipping you must select "Small boxed kits or Special Delivery" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21

Back in stock...
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

3.96/4.55

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

Brass Axle bearings x 40

Brass Axle bearings x 40

2.88/3.31

To suit pinpoint axles (WTW01-4), SW1058W, SW1208Wetc.+

Head 3.15mm wide x 0.25mm deep, Body 2.0mm wide x 2.25mm deep.
find out more

O-scale MTH Fine-scale Locos (Retail only)

Scalelink | O-scale MTH Fine-scale Locos (Retail only)

O-scale KBayStsB Bavarian S3/6 Pacific in Green

O-scale KBayStsB Bavarian S3/6 Pacific in Green

Ref: 20-3400-2

This livery is Era 1 with Black wheels

For shipping you must select 0-scale locos or we cannot supply.

International shipping = e-mail for shipping costs

Features:- Die-Cast Metal Chassis, Authentic Paint Scheme, Metal Wheels and Axles,

Constant Voltage Headlight, Die-Cast Bogie Sides, Driver and Fireman Figures,

Operating Firebox Glow, Metal Handrails and Bell, Metal Whistle, Operating Head & Tail Lights

Lit Cab Interior. Synchronized Puffing ProtoSmoke® System, Operating Tender Back-up Light,

Locomotive Speed Control In Scale MPH Increments, Die-Cast Boiler, Chassis, and Tender Body,

Precision Flywheel Equipped Motor, Wireless Drawbar, •NEM 310/311 Fine Scale Wheels,

European NEM Fine Scale Couplers Included, NEM 365 Coupler Pocket, NEM 362 Lenz®

Compatible Coupler Included, CE Rated, Sprung Buffers, 1:45 Scale Proportions,

Proto-Sound 3.0 With The Digital Command System Featuring:-

Quillable Whistle With Passenger Station Proto-Effects,

Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0,

independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.

When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:-

Headlight on/off, Bell on/off, Whistle/Horn on/off, Start-up/Shut-down, PFA initiate and advance

Cab Light on/off, Engine Sounds on/off, Volume low, med, high, off, Smoke on/off,

Forward Signal Sound, Reverse Signal Sound, Coupler Slack Sound, Grade Crossing,

One-Shot Doppler on/off, Extended Start Up, Extended Shut Down, Labouring Chuffs,

Drifting Chuffs, Smoke Volume low, med, high, Single short whistle toot, Coupler Close,

Feature Reset, Idle Sequence 1, Idle Sequence 2, Idle Sequence 3, Idle Sequence 4,

Brakes auto/off, Cab Chatter auto/off, Clickety-Clack auto/off,

Unit Measures:20 7/8" x 2 3/4" x 4 1/4" Operates On 42" Radius Curves.

Price: 1,140.00/1,311.00 (Including VAT at 20%)

0-scale E94 Crocodile in Orange

0-scale E94 Crocodile in Orange

Ref: 20-5672-2

The Austrian/German E94.

For shipping you must select 0-scale locos or we cannot supply.

International shipping = e-mail for shipping costs

Main features are:- Intricately Detailed Die-Cast Body, Die-Cast Truck Sides & Pilots, Die-Cast Metal Chassis,

Metal Handrails and Decorative Horn, (2) Engineer Cab Figures, Authentic Paint Scheme, Sprung Buffers,

Metal Wheels, Axles and Gears, NEM 340 Metal Wheels, Kadee Compatible Coupler Mounting Pads,

(2) NEM 362 Lenz Compatible Couplers, (2) NEM 365 Coupler & Pocket Assemblies,

Directionally Controlled Constant voltage LED Headlights, Lighted Cab Interior,

(2) Precision Flywheel Equipped Motors, Motorized Operating Pantographs, Onboard DCC Receiver,

Locomotive Speed Control In Scale MPH Increments, Proto-Scale 3-2 3-Rail/2-Rail Conversion Capable,

1:45 Scale Proportions, Proto-Sound 3.0 With The Digital Command System Featuring: Freight Yard Proto-Effects,

Unit Measures:413mm X 69.5mm X 99.85mm, Operates On 36" Radius Curves.

DCC Features - Headlight/Taillights,Bell On/Off, Horn Blast, Start-up/Shut-down Sounds,

Passenger Station/Freight Yard Sounds, Lights (except head/tail lights), Master Volume UP/Down,

Front Coupler Open, Rear Coupler Open, Forward Horn Signal, Reverse HOrn Signal, Grade Crossing Signal,

Idle Sequences 2, Idle Sequences 1, Extended Start-up Sounds, Extended Shut-down Sounds,

One Shot Doppler Effect, Coupler Slack Sound, Coupler Close Sound, Single Horn Sound Blast,

Engine Sound On/Off, Brake Sound On/Off, Cab Chatter Sounds, Feature Reset Activation,

Panto Auto/Manual, Front Panto Up/Down, Rear Panto Up/Down, Train Marker.

Price: 720.00/828.00 (Including VAT at 20%)

0-scale E94 Crocodile in DB Green

0-scale E94 Crocodile in DB Green

Ref: 20-5673-3

The Austrian/German E94.

For shipping you must select 0-scale locos or we cannot supply.

International shipping = e-mail for shipping costs

Main features are:- Intricately Detailed Die-Cast Body, Die-Cast Truck Sides & Pilots, Die-Cast Metal Chassis,

Metal Handrails and Decorative Horn, (2) Engineer Cab Figures, Authentic Paint Scheme, Sprung Buffers,

Metal Wheels, Axles and Gears, NEM 340 Metal Wheels, Kadee Compatible Coupler Mounting Pads,

(2) NEM 362 Lenz Compatible Couplers, (2) NEM 365 Coupler & Pocket Assemblies,

Directionally Controlled Constant voltage LED Headlights, Lighted Cab Interior,

(2) Precision Flywheel Equipped Motors, Motorized Operating Pantographs, Onboard DCC Receiver,

Locomotive Speed Control In Scale MPH Increments, Proto-Scale 3-2 3-Rail/2-Rail Conversion Capable,

1:45 Scale Proportions, Proto-Sound 3.0 With The Digital Command System Featuring: Freight Yard Proto-Effects,

Unit Measures:413mm X 69.5mm X 99.85mm, Operates On 36" Radius Curves.

DCC Features - Headlight/Taillights,Bell On/Off, Horn Blast, Start-up/Shut-down Sounds,

Passenger Station/Freight Yard Sounds, Lights (except head/tail lights), Master Volume UP/Down,

Front Coupler Open, Rear Coupler Open, Forward Horn Signal, Reverse HOrn Signal, Grade Crossing Signal,

Idle Sequences 2, Idle Sequences 1, Extended Start-up Sounds, Extended Shut-down Sounds,

One Shot Doppler Effect, Coupler Slack Sound, Coupler Close Sound, Single Horn Sound Blast,

Engine Sound On/Off, Brake Sound On/Off, Cab Chatter Sounds, Feature Reset Activation,

Panto Auto/Manual, Front Panto Up/Down, Rear Panto Up/Down, Train Marker.

Price: 720.00/828.00 (Including VAT at 20%)

MTH Premier Wireless Drawbar Set

MTH Premier Wireless Drawbar Set

Ref: 20-89011

Back in stock BUT only 3 available

Price: 27.00/31.05 (Including VAT at 20%)

0-scale Dreyfuss-Hudson 4-6-4 NYC

0-scale Dreyfuss-Hudson 4-6-4 NYC

Ref: 22-3527-2

This is a New York Central, Dreyfuss-Hudson in pale grey livery for 2-rail, fine-scale operation.

DCS Features are:- Die-Cast Boiler and Chassis, Die-Cast Tender Body, Authentic Paint Scheme, Real Tender Coal Load,

Die-Cast Locomotive and Tender Trucks, Engineer and Fireman Figures, Metal Handrails and Whistle, Metal Wheels and Axles, Kadee Coupler Mounting Pads, Prototypical Rule 17 Lighting, Constant Voltage Headlight, Operating Firebox Glow,

Operating Marker Lights, Lighted Cab Interior, Operating Tender Back-up Light, 7-Pole Precision Flywheel-Equipped Motor, Synchronized Puffing ProtoSmoke System, Locomotive Speed Control In Scale MPH Increments, Wireless Drawbar, 1:48 Scale Proportions,

DCC Steam Features are:- Onboard DCC Receiver, Proto-Scale 3-2 3-Rail/2-Rail Conversion Capable,

Proto-Sound 3.0 With The Digital Command System Featuring: Quillable Whistle With Passenger Station Proto-Effects,

Headlight/Tail light, Bell, Whistle, Start-up/Shut-down, Passenger Station/Freight Yard Sounds, All Other Lights (On/Off),

Master Volume, Front Coupler, Rear Coupler, Forward Signal, Reverse Signal, Grade Crossing, Smoke On/Off, Smoke Volume, Idle Sequence 3, Idle Sequence 2, Idle Sequence 1, Extended Start-up, Extended Shut-down, One Shot Doppler,

Coupler Slack, Coupler Close, Single Horn Blast, Engine Sounds, Brake Sounds, Cab Chatter, Feature Reset, Labor Chuff,

Drift Chuff

Unit Measures:25 1/2" x 2 3/4" x 3 3/4"

Operates On 42" Radius Curves

Price: 1,014.00/1,166.10 (Including VAT at 20%)

MTH Duchess headlight bulb set

MTH Duchess headlight bulb set

Ref: CA-0000118

Pack contains 2 bulbs on leads with connector

ONE ONLY REMAINING

Price: 6.60/7.59 (Including VAT at 20%)

MTH Duchess traction tyre

MTH Duchess traction tyre

Ref: DE0000031

Sold as single tyre.

Price: 2.40/2.76 (Including VAT at 20%)

Scalelink | O-scale MTH Fine-scale Locos (Retail only)

Buy now with PayPal