Product Sections

Main Pages

Best Sellers

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

MG 'TC' Wheels - set of 5

MG 'TC' Wheels - set of 5

£20.95/$26.19

Cast 24mm wheel, 30mm x 5mm tyre, pack of 5

Etched spokes - these wheels are in kit form to be assembled.
find out more

1:76 German Crosses

£3.00/$3.75

See ST1012 for picture

An etched brass, reusable stencil.
find out more

HO-scale Scale Link Catenary 1500v type

Scalelink | HO-scale Scale Link Catenary 1500v type

1500 volt Catenary Mast Pack

1500 volt Catenary Mast Pack

Ref: SLCM01

Pack of 10 whitemetal masts plus etched tensioners & supports. [5 short, 5 long] + isolators.

Coffret de 10 poteaux en metal-blanc avec 10 appuis en inox [5 Court, 5 Longue] et isolateurs en resine .

Price: £36.00/$45.00 (Including VAT at 20%)

1500 volt Catenary Wire Pack 'A'

1500 volt Catenary Wire Pack 'A'

Ref: SLCW01

Pack contains 7 x 416mm lengths of stainless steel catenary wires.

Coffret des fils de catenaire [7 pieces x 416mm longeur] fabrique en inox.

Price: £36.00/$45.00 (Including VAT at 20%)

1500 volt Catenary Wire Pack 'B' with tensioner

1500 volt Catenary Wire Pack 'B' with tensioner

Ref: SLCW02

Pack contains 7 x 312mm lengths of stainless steel catenary wires and a tensioner.

Coffret des fils de catenaire [7 pieces x 312mm longeur avec tondeur] fabrique en inox.

Price: £36.00/$45.00 (Including VAT at 20%)

1500 volt Catenary Wire Pack 'C'

1500 volt Catenary Wire Pack 'C'

Ref: SLCW03

Pack contains 7 x 364mm lengths of stainless steel catenary wires.

Coffret des fils de catenaire [7 pieces x 364mm longeur] fabrique en inox.

Price: £36.00/$45.00 (Including VAT at 20%)

Scalelink | HO-scale Scale Link Catenary 1500v type