Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

21mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

21mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 21mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

Imon Code 60 rail joiners x 12

Imon Code 60 rail joiners x 12

£1.50/$1.88

Supercedes SDG741A.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

6 x Threaded crankpins & slotted retainers

£9.00/$11.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£12.00/$15.00

This pack contains 2 x 16mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£2.00/$2.50

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

'N-scale' Shinohara Track & Pointwork c60 / Aiguillages (9mm gauge)

Scalelink |  'N-scale' Shinohara Track & Pointwork c60 / Aiguillages (9mm gauge)

900mm Code 60 Nickel-silver Flexi-track x 10

900mm Code 60 Nickel-silver Flexi-track x 10

Ref: SDG715B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £12.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Only 1 remaining - 10/08/2022

Price: £57.60/$72.00 (Including VAT at 20%)

c60 No 4 Y-point

c60 No 4 Y-point

Ref: SDG707

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

19.7" / 50cm radius

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 5 remaining - 26/11/2020

Price: £16.20/$20.25 (Including VAT at 20%)

c60 No 3 Y-point

c60 No 3 Y-point

Ref: SDG721

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

19.7" / 50cm radius

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 5 remaining - 26/11/2020

Price: £16.20/$20.25 (Including VAT at 20%)

Scalelink |  'N-scale' Shinohara Track & Pointwork c60 / Aiguillages (9mm gauge)