Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SEE EBAY LISTING = MAX 5 Packs per Customer.

RESTRICTED TO 5 PACKS PER CUSTOMER.
find out more

6 x Threaded crankpins & slotted retainers

£9.00/$11.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

2mm (0.80") diameter plastic rod for SLC070B

2mm (0.80

£1.20/$1.50

NOTE: POSTAGE £7.50 + VAT as this is 36cm long unless cut.
find out more

'Ogee' guttering accessories

'Ogee' guttering accessories

£7.80/$9.75

Stop ends x 4 pairs, Swan necks x 2, Internal corner x 2, Hopper x 1, External corner x 4

(Pieces pour chenaux et descentes - ????)


find out more

'Ogee' guttering and clips

'Ogee' guttering and clips

£7.80/$9.75

6 x 70mm x 4mm lengths plus 6 x jointing clips.

(Cheneau et agrafes - Dachrinne)


find out more

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

Code 70 No 8 Turnout Left-hand

Code 70 No 8 Turnout Left-hand

£21.60/$27.00

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 5 remaining -12/09/2022
find out more

HO/OO' Code 70 IMON Track & Shinohara Pointwork (16.5mm gauge)

Scalelink |  HO/OO' Code 70 IMON Track & Shinohara Pointwork (16.5mm gauge)

Page:  1  2  3   >   >>   View All (25) Page:  1  2  3   >   >>   View All (25)

c70 Metal Rail-joiners x 50

c70 Metal Rail-joiners x 50

Ref: SDG341-H0/00

Price: £10.80/$13.50 (Including VAT at 20%)

c70 Metal Rail-joiners x 12

c70 Metal Rail-joiners x 12

Ref: SDG341A-H0/00

Price: £3.60/$4.50 (Including VAT at 20%)

SHINOHARA/IMON c70 Insulated Rail Joiners x 12

SHINOHARA/IMON c70 Insulated Rail Joiners x 12

Ref: SDG342A

Price: £3.60/$4.50 (Including VAT at 20%)

SHINOHARA c70 Insulated Rail Joiners x 10

SHINOHARA c70 Insulated Rail Joiners x 10

Ref: SDG342B

Price: £3.00/$3.75 (Including VAT at 20%)

Code 70 Flexi-track - Nickel-silver

Code 70 Flexi-track - Nickel-silver

Ref: SDG315

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION. NOW MADE BY IMON MODELS using Shinohara tooling

ONLY 2 metres left.

NOW MADE BY IMON MODELS using Shinohara tooling.

Sorry - sold out

Price: £7.80/$9.75 (Including VAT at 20%)

Code 70 Flexi-track - Nickel Silver x 10

Code 70 Flexi-track - Nickel Silver x 10

Ref: SDG315B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR code 70 JOINERS SEE `N' SECTION. NOW MADE BY IMON MODELS using Shinohara tooling

NOW MADE BY IMON MODELS using Shinohara tooling.

Just 6 boxes left -12/09/2022

Price: £75.00/$93.75 (Including VAT at 20%)

Code 70 Double-guard Flexi-track

Code 70 Double-guard Flexi-track

Ref: SDG317

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Only 19 remaining -12/09/2022

Price: £12.00/$15.00 (Including VAT at 20%)

Code 70 No 4 Turnout Left-hand

Code 70 No 4 Turnout Left-hand

Ref: SDG301

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 10 remaining -12/09/2022

Price: £19.80/$24.75 (Including VAT at 20%)

Code 70 No 4 Turnout Right-hand

Code 70 No 4 Turnout Right-hand

Ref: SDG302

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 8 remaining -12/09/2022

Price: £19.80/$24.75 (Including VAT at 20%)

Code 70 No 6 Turnout Left-hand

Code 70 No 6 Turnout Left-hand

Ref: SDG303

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry -sold out

Price: £22.50/$28.13 (Including VAT at 20%)

Code 70 No 6 Turnout Right-hand

Code 70 No 6 Turnout Right-hand

Ref: SDG304

-New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - sold out

Price: £22.50/$28.13 (Including VAT at 20%)

Code 70 No 8 Turnout Left-hand

Code 70 No 8 Turnout Left-hand

Ref: SDG305

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 5 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Scalelink |  HO/OO' Code 70 IMON Track & Shinohara Pointwork (16.5mm gauge)