Product Sections
Main Pages
Best Sellers
6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS16mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H025 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.
Set of 25 retainers for standard crankpins..
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELSMarkits Crankpin Bushes x 10
Ideal for bushing connecting rods etc
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,14mm Bogie wheels - 12-spoke
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H020mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1
This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more
Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,Romford Axle-nut screwdriver
6 x Threaded crankpins & slotted retainers
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELSHandrail knobs - Short x 20
