Product Sections

Main Pages

Best Sellers

Romford DeLuxe Outside Cranks x 2

Romford DeLuxe Outside Cranks x 2

4.68/5.38


find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

3.30/3.80

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford DeLuxe Crankpin sets (8)

Romford DeLuxe Crankpin sets (8)

7.50/8.63


find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.
find out more

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

7.74/8.90

This is a milled-brass hornblock for a standard 1/8th inch axle.

It is designed to be used in an etched chassis up to 0.60mm thick. (24/1000 inch).

You need 2 per axle.
find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

O-gauge (1:43) Markits 2-rail fine-scale, coach & wagon wheelsets

Scalelink |  O-gauge (1:43) Markits 2-rail fine-scale, coach & wagon wheelsets

3-foot/7inch Coach disc wheelset

3-foot/7inch Coach disc wheelset

Ref: 7MW001

These wheels are made to the same exacting standards as the Markits/Romford OO-gauge wheels.

Each pack contains 2 machined & blackened, 2-rail diecast wheelsets and 4 brass bearings.

These add weight and superb running qualities.

For shipping, please select "Small boxed kits" as they are too big for "Large letter post"

3-foot/7inch Mansell Coach disc wheelset

3-foot/7inch Mansell Coach disc wheelset

Ref: 7MW002

These wheels are made to the same exacting standards as the Markits/Romford OO-gauge wheels.

Each pack contains 2 machined & blackened, 2-rail diecast wheelsets and 4 brass bearings.

These add weight and superb running qualities.

For shipping, please select "Small boxed kits" as they are too big for "Large letter post"

3-foot/1inch Three-hole disc wagon wheelset

3-foot/1inch Three-hole disc wagon wheelset

Ref: 7MW003

These wheels are made to the same exacting standards as the Markits/Romford OO-gauge wheels.

Each pack contains 2 machined & blackened, 2-rail diecast wheelsets and 4 brass bearings.

These add weight and superb running qualities.

For shipping, please select "Small boxed kits" as they are too big for "Large letter post"

3-foot/1inch 8-spoke wagon wheelset

3-foot/1inch 8-spoke wagon wheelset

Ref: 7MW004

These wheels are made to the same exacting standards as the Markits/Romford OO-gauge wheels.

Each pack contains 2 machined & blackened, 2-rail diecast wheelsets and 4 brass bearings.

These add weight and superb running qualities.

For shipping, please select "Small boxed kits" as they are too big for "Large letter post"

3-foot/1inchSplit 8-spoke wagon wheels

3-foot/1inchSplit 8-spoke wagon wheels

Ref: 7MW005

These wheels are made to the same exacting standards as the Markits/Romford OO-gauge wheels.

Each pack contains 2 machined & blackened, 2-rail diecast wheelsets and 4 brass bearings.

These add weight and superb running qualities.

For shipping, please select "Small boxed kits" as they are too big for "Large letter post"

Scalelink |  O-gauge (1:43) Markits 2-rail fine-scale, coach & wagon wheelsets

Buy now with PayPal