Product Sections

Main Pages

Best Sellers

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

£3.96/€4.55

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

£4.20/€4.83

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/€2.76

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY

find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

Slotted for improved grub screw location.

For spacing washers see WPY33
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

O-scale Stanier bogie set 2-rail Fine-scale for a coach

£38.24/€43.98

This pack contains 2 ready to run LMS 9-foot bogies and 2 bolsters with "fine-scale" wheels, 4 buffers & springs, one pair of screw-link couplings and screws.

Pick-ups for coach lighting are already fitted.

The wheels are described by MTH as fine-scale & have 2.2mm deep flanges. The back to back is 29.2mm.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

23mm/18-spoke Driving wheel x 1

23mm/18-spoke Driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Shinohara Track & Pointwork `HOn3' / Aiguillages

Scalelink | Shinohara Track & Pointwork `HOn3' / Aiguillages

Page:  1  2   >   >>   View All (18) Page:  1  2   >   >>   View All (18)

1 metre Flexi-track Code 70 `HOn3'

1 metre Flexi-track Code 70 `HOn3'

Ref: SDG415

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Only 8 remaining - 26/11/2020

Price: £6.90/€7.94 (Including VAT at 20%)

10 metres Flexi-track code 70 'HOn3'

10 metres Flexi-track code 70 'HOn3'

Ref: SDG415B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Sorry - all gone

Price: £66.00/€75.90 (Including VAT at 20%)

Code 70 No 4 Turnout - Left = H0n3

Code 70 No 4 Turnout - Left = H0n3

Ref: SDG401

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONE available 12/09/2024

Only 1 remaining - 12/09/2022

Price: £19.80/€22.77 (Including VAT at 20%)

Code 70 No 4 Turnout - Right = H0n3

Code 70 No 4 Turnout - Right = H0n3

Ref: SDG402

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

4 available 12/09/2024

Only 1 remaining - 12/09/2022

Price: £19.80/€22.77 (Including VAT at 20%)

Code 70 No 6 Turnout - Left = H0n3

Code 70 No 6 Turnout - Left = H0n3

Ref: SDG403

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 7 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

Code 70 No 6 Turnout - Right = H0n3

Code 70 No 6 Turnout - Right = H0n3

Ref: SDG404

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

30 degree crossing = H0n3

30 degree crossing = H0n3

Ref: SDG430

Only 2 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

45 degree crossing = H0n3

45 degree crossing = H0n3

Ref: SDG431

Only 12 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

60 degree crossing = H0n3

60 degree crossing = H0n3

Ref: SDG432

Only 6 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

90 degree crossing = H0n3

90 degree crossing = H0n3

Ref: SDG433

Only 14 remaining - 12/09/2022

Price: £19.20/€22.08 (Including VAT at 20%)

Code 70 No 3 turnout - Y = H0n3

Code 70 No 3 turnout - Y = H0n3

Ref: SDG493

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

SORRY - ALL GONE

Only 7 remaining - 12/09/2022

Price: £18.00/€20.70 (Including VAT at 20%)

1 metre Dual-gauge flexi-track Code 70

1 metre Dual-gauge flexi-track Code 70

Ref: SDG465

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Sorry - all gone

Price: £9.12/€10.49 (Including VAT at 20%)

Scalelink | Shinohara Track & Pointwork `HOn3' / Aiguillages