This pack contains 2 ready to run LMS 9-foot bogies and 2 bolsters with "fine-scale" wheels, 4 buffers & springs, one pair of screw-link couplings and screws.

Pick-ups for coach lighting are already fitted.

The wheels are described by MTH as fine-scale & have 2.2mm deep flanges. The back to back is 29.2mm.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£1.98/€2.28

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.
find out more

Sundries = Motors etc

Scalelink | Sundries = Motors etc

Page: 1 2 3 > >> View All (28) Page: 1 2 3 > >> View All (28)

Scale Link 12v Coreless Motor

Ref: SL-CM2517S

Technical data:-

25mm long x 17mm round with single 1mm shaft, 4.8mm long.

Mounting hole spacing 10mm. M2 screws - see listing below (SM-MMS02)

Made in China.

Price: £30.00/€34.50 (Including VAT at 20%)

Scale Link 12v DC 5-pole Motor

Ref: SL-CM2820D

Technical data:-

25mm long x 20mm x 15mm with a double 1.5mm shaft 8.5mm long.

Mounting hole spacing 12.5mm. M2 screws -see listing below (SM-MMS02)

Made in China.

Price: £18.00/€20.70 (Including VAT at 20%)

Scale Link 12v DC 5-pole motor 1220D

Ref: SL-IM1220

Technical data:-

20mm long x 12mm tall x 10mm wide with double 1.5mm shafts, 9mm long.

Mounting hole spacing 8.5mm.. Requires M1.4 mounting screws - see listing SM-MMS01

Made in Japan.

This is an ideal replacement for the Mashima SM-MHK1220D

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £16.20/€18.63 (Including VAT at 20%)

Canon 12volt DC 3-pole motor with double shafts

Ref: Canon-CN16-0640

The motor measures 34mm x 16mm x 14.6mm and has a 1.5mm shaft.

Fixing is by 2 x M1.7 x 2.0mm bolts which are NOT included - SEE SM-MMS06.

Rated speed 6900 rpm on load. 40ma current load. Fixing centres 11mm

Overall length including the double shafts is 47.7mm.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £27.00/€31.05 (Including VAT at 20%)

Canon 12volt DC 5-pole motor

Ref: CANON-CN22

The motor measures 32.8mm x 22mm x18mm and has 2.0mm shaft.

Overall length, including the double shafts is 64.70mm

Fixing is by 2 x M2 x 2.0mm bolts which are NOT included - SEE SM-MMS02.

Rated speed 11200 rpm off load. 40ma current load. Fixing centres 15mm

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £30.00/€34.50 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor

Ref: SM-H1024D

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Fixings 10mm apart.

Price: £18.00/€20.70 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH21]

Ref: SM-H881

Length over body 21mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH19]

Ref: SM-H882

Length over body 19mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH17]

Ref: SM-H883

Length over body 17mm. Height 13mm. Width 9.6mm

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono motor brushes & springs

Ref: SM-MB01

Pack contains 2 brushes & 2 springs

Price: £4.80/€5.52 (Including VAT at 20%)

Mashima 1015D Motor

Ref: SM-MHK1015

L = 15mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 35mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £36.00/€41.40 (Including VAT at 20%)

Mashima 1020D Motor

Ref: SM-MHK1020

L = 20mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £36.00/€41.40 (Including VAT at 20%)

Scalelink | Sundries = Motors etc