Product Sections
Main Pages
Best Sellers
Etched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.26mm/20-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 26mm.THESE WHEELS ARE SOLD SINGLY6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.19mm/16-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Diameter of drum is 19mm.THESE WHEELS ARE SOLD SINGLYRomford 16.5mm Axle (1/8" diameter)
Morris C4 Mk1 Radio Van - Wooden body
Model built & photographed by Tony Little (Military Modelcraft)
A complete resin/whitemetal kit of this lengthened wireless van with wooden body.For shipping you must select "Small boxed kits or Special Delivery" or we cannot supply.International shipping = e-mail for shipping costsRomford Axle-nut screwdriver
Back in stock...
find out more
20mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm.THESE WHEELS ARE SOLD SINGLYMarkits DeLuxe Crankpin sets (6)
Back in stock
find out more
Brass Axle bearings x 40
To suit pinpoint axles (WTW01-4), SW1058W, SW1208Wetc.+
Head 3.15mm wide x 0.25mm deep, Body 2.0mm wide x 2.25mm deep.
