Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£6.00/$7.50

.Limited quantity available 17/06/2025
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

RESTRICTION REMOVED for sensible quantites.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

RESTRICTION REMOVED for sensible quantites.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK

ORESTRICTION REMOVED for sensible quantites.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

Hanazono 12 volt motor bogie 26.0mm wheelbase

Hanazono 12 volt motor bogie 26.0mm wheelbase

£46.80/$58.50

Fitted with 12.0mm disc wheels.

BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

Romford 18.0mm Axle

Romford 18.0mm Axle

£1.98/$2.48

Includes two brass fixing nuts for EM track For spacing washers see WPY33

RESTRICTION REMOVED for sensible quantites.
find out more

'SN3' Code 70 Shinohara Track & Pointwork

Scalelink |  'SN3' Code 70 Shinohara Track & Pointwork

c70 SN3 Flexi-track Nickel-silver

c70 SN3 Flexi-track Nickel-silver

Ref: SDG1015

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Only 2 remaining - 26/11/2020

Price: £7.20/$9.00 (Including VAT at 20%)

c70 SN3 Flexi-track x 10.

c70 SN3 Flexi-track x 10.

Ref: SDG1015B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Sorry - sold out

Price: £69.60/$87.00 (Including VAT at 20%)

c70 SN3 No 6 Left-hand point

c70 SN3 No 6 Left-hand point

Ref: SDG1003

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

30+ remaining - 26/11/2020

Price: £19.20/$24.00 (Including VAT at 20%)

c70 SN3 No 6 Right-hand point

c70 SN3 No 6 Right-hand point

Ref: SDG1004

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

20+ remaining - 26/11/2020

Price: £19.20/$24.00 (Including VAT at 20%)

Scalelink |  'SN3' Code 70 Shinohara Track & Pointwork