Product Sections
Main Pages
Best Sellers
16mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H0M1.6 x 2mm Steel Grub-screws x 10
24 x Crank pins for driving wheels
Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SOLD OUT24 x Threaded crankpins & slotted retainers.
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELSRomford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELSMarkits 1/8th inch axle bush x 12
25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.
Set of 25 retainers for standard crankpins..
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS20mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0THESE WHEELS ARE SOLD SINGLYMarkits Crankpin Bushes x 10
Ideal for bushing connecting rods etc
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
