Product Sections

Main Pages

Best Sellers

Rectangular Wicker Basket

Rectangular Wicker Basket

2.00/2.30


find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21

Available again.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

4.20/4.83

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Galvanised Tin Bath

Galvanised Tin Bath

2.25/2.59

Every House should have one!
find out more

Dustbin 3- piece kit

Dustbin 3- piece kit

2.50/2.88


find out more

Tap, Sink and Waste-pipe

Tap, Sink and Waste-pipe

3.00/3.45


find out more

N-scale Shinohara Track & Pointwork c70 / Aiguillages

Scalelink |  N-scale Shinohara Track & Pointwork c70 / Aiguillages

Page:  1  2   >   >>   View All (21) Page:  1  2   >   >>   View All (21)

900mm Code 70 Nickel-silver Flexi-track x 1

900mm Code 70 Nickel-silver Flexi-track x 1

Ref: SDG615

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `BELOW'

Only 2 remaining - 26/11/2020

Price: 6.36/7.31 (Including VAT at 20%)

900mm Code 70 Nickel-silver Flexi-track x 10

900mm Code 70 Nickel-silver Flexi-track x 10

Ref: SDG615B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `BELOW'

Only 4 remaining - 26/11/2020

Price: 63.60/73.14 (Including VAT at 20%)

Code 70 metal rail joiners x 50

Code 70 metal rail joiners x 50

Ref: SDG341

Code 70 rail

Only 6remaining - 26/11/2021

Price: 7.80/8.97 (Including VAT at 20%)

Code 70 insulating rail joiners x 10

Code 70 insulating rail joiners x 10

Ref: SDG342

We now have 6 packs available as at 23/12/2021

Price: 3.00/3.45 (Including VAT at 20%)

c70 No4 Turnout Left-hand

c70 No4 Turnout Left-hand

Ref: SDG601

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 8 remaining - 26/11/2020

Price: 18.00/20.70 (Including VAT at 20%)

c70 No4 Turnout Right-hand

c70 No4 Turnout Right-hand

Ref: SDG602

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 8 remaining - 26/11/2020

Price: 18.00/20.70 (Including VAT at 20%)

c70 No6 Turnout Left Hand

c70 No6 Turnout Left Hand

Ref: SDG603

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 26/11/2020

Price: 19.20/22.08 (Including VAT at 20%)

c70 No6 Turnout Right Hand

c70 No6 Turnout Right Hand

Ref: SDG604

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 4 remaining - 26/11/2020

Price: 19.20/22.08 (Including VAT at 20%)

c70 No 4 Y-point

c70 No 4 Y-point

Ref: SDG607

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 17.7cm / 6.96" : Radius 45cm / 17.7" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining - 26/11/2020

Price: 18.00/20.70 (Including VAT at 20%)

c70 3-way Turnout

c70 3-way Turnout

Ref: SDG608

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 21.5cm / 8.46" : Left frog 9.30 degrees / Right frog 12 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 5 remaining - 26/11/2020

Price: 37.20/42.78 (Including VAT at 20%)

c70 Double Crossover

c70 Double Crossover

Ref: SDG612

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Length 30.8cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 26/11/2020

Price: 57.60/66.24 (Including VAT at 20%)

c70 No 4 Double slip

c70 No 4 Double slip

Ref: SDG613

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 800mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 2 remaining - 26/11/2020

Price: 57.60/66.24 (Including VAT at 20%)

Scalelink |  N-scale Shinohara Track & Pointwork c70 / Aiguillages