Product Sections

Main Pages

Best Sellers

16mm /12-spoke driving wheel

16mm /12-spoke driving wheel

£3.60/€4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm
find out more

Ford WOA1 Staff Car

Ford WOA1 Staff Car

£14.80/€17.02

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Romford DeLuxe Crankpin sets (6)

Romford DeLuxe Crankpin sets (6)

£5.58/€6.42


find out more

Code 70 No 8 Curvable Turnout Right-hand

Code 70 No 8 Curvable Turnout Right-hand

£24.00/€27.60

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.62/€1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

1:76 British Seated Officer & Driver

1:76 British Seated Officer & Driver

£2.88/€3.31

2-figure set (SSP079)
find out more

18.45mm/16-spoke driving wheel

£3.60/€4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm
find out more

1:50 Bulk pack of figures (60)

1:50 Bulk pack of figures (60)

£45.00/€51.75

Set of 60 assorted unpainted figures

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.05/€5.81


find out more

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

40:1 Gearset 1/8

£7.50/€8.63

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20401
find out more

Sundries = Gear-sets, Motors etc

Scalelink | Sundries = Gear-sets, Motors etc

Show First 12 Product(s) Show First 12 Product(s)

27:1 Gearset 1/8

27:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS01

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20271

Price: £7.50/€8.63 (Including VAT at 20%)

27:1 Gearset 1/8

27:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS02

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20272

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS03

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20401

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" (Slimline) WHEEL BORE/1.5mm WORM

Ref: SLGS03-S

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series SLIMLINE gears

Markits equivalent MGRS20401N

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS04

Worm diameter 7.1mm : Gear diameter 9.2mm : 20-series gears

Markits equivalent MGRS20402

SEE ALSO SLGS13

Price: £7.50/€8.63 (Including VAT at 20%)

50:1 Gearset 1/8

50:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS05

Worm diameter 6.3mm : Gear diameter 14.0mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/50-1

Price: £7.50/€8.63 (Including VAT at 20%)

60:1 Gearset 1/8

60:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS06

Worm diameter 7.1mm : Gear diameter 13.3mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/60-1

Price: £7.50/€8.63 (Including VAT at 20%)

60:1 Gearset 1/8

60:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS07

Worm diameter 7.1mm : Gear diameter 13.3mm : Shaft centre distance 9.53mm

Markits equivalent MGRS/60-2

Price: £7.50/€8.63 (Including VAT at 20%)

22:1 Gearset 2.0mm WHEEL bore/1.5mm WORM bore

22:1 Gearset 2.0mm WHEEL bore/1.5mm WORM bore

Ref: SLGS08-A

This gear wheel does not have a 'boss'

Worm diameter 4.7mm : Gear diameter 6.1mm : Shaft centre distance 4.94mm

Markits equivalent M4GRS-H/22NB-2SNB

Price: £7.50/€8.63 (Including VAT at 20%)

22:1 Gearset 2.0mm WHEEL bore/2.0mm WORM bore

22:1 Gearset 2.0mm WHEEL bore/2.0mm WORM bore

Ref: SLGS08-B

This gear wheel does not have a 'boss'

Worm diameter 4.7mm : Gear diameter 6.1mm : Shaft centre distance 4.94mm

Markits equivalent M4GRS-H/22NB-2SNB

Price: £7.50/€8.63 (Including VAT at 20%)

38:1 Gearset 1/8

38:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS09

This gear wheel does have a 'boss'

Worm diameter 4.7mm : Gear diameter 9.9mm

Markits equivalent M4GRS-H/38NB-2S

Price: £7.50/€8.63 (Including VAT at 20%)

50:1 Gearset 1/8

50:1 Gearset 1/8" WHEEL BORE/2.0mm WORM

Ref: SLGS10

Worm diameter 4.7mm : Gear diameter 13.0mm

Markits equivalent M4GRS-H/50-2S

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

Ref: SLGS11

This set is designed for 'O'-gauge models and includes the MM1240 mount and bushes.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore : Centres 12.25mm.

Markits equivalent MM7-1-1140

Do you just require a wheel & worm? If so, see SLGS11NM. These are not the same

gears as used in SLGS11.

Price: £17.90/€20.59 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" wheel bore/2.0mm worm

Ref: SLGS11NM

This set is designed for 'O'-gauge models.

Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm bore

Do you require a wheel, worm & mount? If so, see SLGS11.

Price: £9.30/€10.70 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

Ref: SLGS12

Original Romford Gearset

13.3mm wheel : 7.1mm worm.

Markits equivalent MGRS-401

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2mm WORM

Ref: SLGS13

Original Romford Gearset

13.3mm wheel :7.1mm worm.

Markits equivalent MGRS402

Price: £7.50/€8.63 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" WHEEL/2.00mm BORE WORM

Ref: SLGS14

This set is designed for 'O'-gauge models. There is NO MOTOR MOUNT.

Gearwheel 12.95mm - 3/16" bore : Worm 7.25mm - 2mm bore.

Price: £12.00/€13.80 (Including VAT at 20%)

40:1 Gearset 3/16

40:1 Gearset 3/16" WHEEL BORE/2.0mm WORM

Ref: SLGS15

This set is designed for 'O'-gauge models. There is NO MOTOR MOUNT.

Gearwheel 13.40mm - 3/16" bore : Worm 9.6mm - 2mm bore.

Price: £13.20/€15.18 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM+ NARROW MOUNT

Ref: SLGS16

Markits gearset MM210/20401N

Price: £14.40/€16.56 (Including VAT at 20%)

40:1 Gearset 1/8

40:1 Gearset 1/8" WHEEL BORE/2.0mm WORM+NARROW MOUNT

Ref: SLGS17

Markits gearset MM210/20402N

Price: £14.40/€16.56 (Including VAT at 20%)

Markits Medium 2mm long Handrail Knobs x 20

Markits Medium 2mm long Handrail Knobs x 20

Ref: MR4HR-M

Markits Medium Handrail Knobs have a 1mm ball and are 2mm long overall.

For Small Handrail Knobs see W&T Paccessory WPY42 & WPY55

For Long Handrail Knobs see W&T Paccessory WPY56.

Price: £6.90/€7.94 (Including VAT at 20%)

M1.6 x 2mm Steel Grub-screws x 10

M1.6 x 2mm Steel Grub-screws x 10

Ref: SM-MMS03

Price: £3.35/€3.85 (Including VAT at 20%)

10BA Grub-screws x 5 long & 5 short

10BA Grub-screws x 5 long & 5 short

Ref: SM-MMS04

Price: £3.35/€3.85 (Including VAT at 20%)

M2.5 Grub screws x 5 x 2.5mm + 5 x 3mm for SLGS11

M2.5 Grub screws x 5 x 2.5mm + 5 x 3mm for SLGS11

Ref: SM-MMS05

Price: £3.35/€3.85 (Including VAT at 20%)

Markits gearbox/motor-mount

Markits gearbox/motor-mount

Ref: MM110

Designed for use with motors with 10mm spacing between mounting screws.

(Mashima 16xx series/1024) 8.5mm wide - Romford gears.

Price: £4.80/€5.52 (Including VAT at 20%)

Markits gearbox/motor-mount

Markits gearbox/motor-mount

Ref: MM208

Designed for use with motors with 8mm spacing between mounting screws.

(Mashima 12xx series/Hanazono) 8.5mm wide - Romford 20-series gears.

Price: £4.80/€5.52 (Including VAT at 20%)

Markits gearbox/motor-mount

Markits gearbox/motor-mount

Ref: MM210

Designed for use with motors with 10mm spacing between mounting screws.

(Mashima 16xx series.) 8.5mm wide - Romford 20-series gears.

Price: £4.80/€5.52 (Including VAT at 20%)

Markits frame-spacers [9.5mm] x 3

Markits frame-spacers [9.5mm] x 3

Ref: MRAXFS09

9.5mm spacers with 2.25mm Centre hole

Price: £6.50/€7.48 (Including VAT at 20%)

Markits frame-spacers [11mm] x 3

Markits frame-spacers [11mm] x 3

Ref: MRAXFS11

11mm spacers with 2.00mm Centre hole

Price: £6.50/€7.48 (Including VAT at 20%)

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

Ref: MRAXFB32

3.7mm OD x 2mm deep x 1/8th bore.

Price: £3.00/€3.45 (Including VAT at 20%)

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

Markits Hornblocks x 6 for 1/8th axle (7.0mm x 6.5mm)

Ref: MRAXFB7

This is a milled-brass hornblock for a standard 1/8th inch axle.

It is designed to be used in an etched chassis up to 0.60mm thick. (24/1000 inch).

You need 2 per axle.

Price: £7.45/€8.57 (Including VAT at 20%)

Canon 12volt DC 3-pole motor

Canon 12volt DC 3-pole motor

Ref: CANON-CN16

The motor measures 20mm x 16mm x 14.6mm and has 1.5mm shaft.

Fixing is by 2 x M1.7 x 2.0mm bolts which are NOT included - SEE SM-MMS06.

Rated speed 6900 rpm on load. 40ma current load. Fixing centres 11mm.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £19.20/€22.08 (Including VAT at 20%)

Canon 12volt DC 5-pole motor

Canon 12volt DC 5-pole motor

Ref: CANON-CN22

The motor measures 32.8mm x 22mm x18mm and has 2.0mm shaft.

Overall length, including the double shafts is 64.70mm

Fixing is by 2 x M2 x 2.0mm bolts which are NOT included - SEE SM-MMS02.

Rated speed 7500 rpm on load. 60ma current load. Fixing centres 15mm

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £21.60/€24.84 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor

Hanazono 12 volt DC 5-pole motor

Ref: SM-H1024D

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Price: £18.00/€20.70 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH21]

Hanazono 12 volt DC 5-pole motor [LH21]

Ref: SM-H881

Length over body 21mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH19]

Hanazono 12 volt DC 5-pole motor [LH19]

Ref: SM-H882

Length over body 19mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH17]

Hanazono 12 volt DC 5-pole motor [LH17]

Ref: SM-H883

Length over body 17mm. Height 13mm. Width 9.6mm

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £16.80/€19.32 (Including VAT at 20%)

Hanazono motor brushes & springs

Hanazono motor brushes & springs

Ref: SM-MB01

Pack contains 2 brushes & 2 springs

Price: £3.60/€4.14 (Including VAT at 20%)

Mashima 1015D Motor

Mashima 1015D Motor

Ref: SM-MHK1015

L = 15mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 35mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Price: £22.80/€26.22 (Including VAT at 20%)

Mashima 1020D Motor

Mashima 1020D Motor

Ref: SM-MHK1020

L = 20mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Price: £22.80/€26.22 (Including VAT at 20%)

Mashima 1024D Motor

Mashima 1024D Motor

Ref: SM-MHK1024

L = 24mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Price: £22.80/€26.22 (Including VAT at 20%)

Mashima 10xx-series Motor Brush x 2

Mashima 10xx-series Motor Brush x 2

Ref: SM-MHK10xx

Price: £3.60/€4.14 (Including VAT at 20%)

Mashima 1220D Motor

Mashima 1220D Motor

Ref: SM-MHK1220

L = 20mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Price: £25.92/€29.81 (Including VAT at 20%)

Mashima 1224D Motor

Mashima 1224D Motor

Ref: SM-MHK1224

L = 24mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

SORRY, ALL SOLD AT SCALE LINK & MASHIMA JAPAN.,

Price: £25.92/€29.81 (Including VAT at 20%)

Mashima 12xx-series Motor Brush x 2

Mashima 12xx-series Motor Brush x 2

Ref: SM-MHK12xx

Price: £2.40/€2.76 (Including VAT at 20%)

Mashima 12xx-series Motor Brush & Spring x 2

Mashima 12xx-series Motor Brush & Spring x 2

Ref: SM-MHK12BS

Price: £3.96/€4.55 (Including VAT at 20%)

Mashima M-16K-S

Mashima M-16K-S

Ref: SM-M16K-S

5-pole open-frame motor. Size 16mm x 13mm x 9.3mm. 10mm single shaft

Includes 2 x M1.4 screws.

Price: £16.80/€19.32 (Including VAT at 20%)

Mashima 1620D motor

Mashima 1620D motor

Ref: SM-MHK1620

L = 20mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 40mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

BACK IN STOCK

Price: £30.00/€34.50 (Including VAT at 20%)

Mashima 1624D motor

Mashima 1624D motor

Ref: SM-MHK1624

L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 44mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

DISCONTINUED

Price: £30.00/€34.50 (Including VAT at 20%)

Mashima 1626DX motor

Mashima 1626DX motor

Ref: SM-MHK1626

L = 26mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Last few available....

Price: £36.00/€41.40 (Including VAT at 20%)

Mashima 1628D motor

Mashima 1628D motor

Ref: SM-MHK1628

L = 28mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Price: £30.00/€34.50 (Including VAT at 20%)

Mashima 1630D motor

Mashima 1630D motor

Ref: SM-MHK1630

NEW LARGE MOTOR from Mashima.

L = 30mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 50mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Price: £30.00/€34.50 (Including VAT at 20%)

Mashima 16xx-series Motor Brush

Mashima 16xx-series Motor Brush

Ref: SM-MHK16xx

Price: £4.36/€5.01 (Including VAT at 20%)

Mashima 1833D Motor

Mashima 1833D Motor

Ref: SM-MH1833

L = 33mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 53mm - shaft 2mm. NOW WITH 2 x M2 SCREWS

These motors have 10mm shafts.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £30.00/€34.50 (Including VAT at 20%)

Mashima 18xx-series Motor Brush x 2

Mashima 18xx-series Motor Brush x 2

Ref: SM-MHK18xx

Price: £3.60/€4.14 (Including VAT at 20%)

Mashima 18xx-series Motor Springs x 2

Mashima 18xx-series Motor Springs x 2

Ref: SM-MHK18MS

Hashima Motor 18xx-series springs x 2

Price: £1.20/€1.38 (Including VAT at 20%)

Mashima mounting screws M1.4 x 2mm

Mashima mounting screws M1.4 x 2mm

Ref: SM-MMS01

Pack contains 2 x M1.4 x 2mm Mashima mounting screws.

Price: £0.60/€0.69 (Including VAT at 20%)

Mashima mounting screws M2 x 2mm

Mashima mounting screws M2 x 2mm

Ref: SM-MMS02

Pack contains 2 x M2 x 2mm Mashima mounting screws. Also suits Canon CN22

Price: £0.60/€0.69 (Including VAT at 20%)

Canon mounting screws M1.7 x 2mm

Canon mounting screws M1.7 x 2mm

Ref: SM-MMS06

Pack contains 2 x M1.7 x 2mm Canon mounting screws.

Price: £0.60/€0.69 (Including VAT at 20%)

Scalelink | Sundries = Gear-sets, Motors etc

Buy now with PayPal