Product Sections
Main Pages
Best Sellers
20mm/17-spoke driving wheel x 1
£4.56/€5.24
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0THESE WHEELS ARE SOLD SINGLY14mm/12-spoke Driving wheel x 1
£3.96/€4.55
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0THESE WHEELS ARE SOLD SINGLY18mm/16-spoke driving wheel x 1
£4.20/€4.83
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0THEY'RE BACK!!!THESE WHEELS ARE SOLD SINGLYEtched de-insulating pick-ups for Scale Link Driving Wheels
£2.40/€2.76
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.22mm/18-spoke Driving wheel x 1
£4.56/€5.24
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0THESE WHEELS ARE SOLD SINGLYRomford 16.5mm Axle (1/8" diameter)
£1.98/€2.28
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.For spacing washers see WPY33Romford 16.5mm axle with flat for grub screw (1/8" diameter)
£1.98/€2.28
MRAX/OO 1/8" diameter axle for 16.5mm track.
Includes two brass fixing nuts.Slotted for improved grub screw location.For spacing washers see WPY336 x Crank pins for driving wheels
£7.25/€8.34
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.O-scale Stanier bogie set 2-rail Fine-scale for a coach
£38.24/€43.98
This pack contains 2 ready to run LMS 9-foot bogies and 2 bolsters with "fine-scale" wheels, 4 buffers & springs, one pair of screw-link couplings and screws.
Pick-ups for coach lighting are already fitted. The wheels are described by MTH as fine-scale & have 2.2mm deep flanges. The back to back is 29.2mm.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs23mm/18-spoke Driving wheel x 1
£4.56/€5.24
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JUNE 2013Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0THESE WHEELS ARE SOLD SINGLY