Product Sections
Main Pages
Best Sellers
18mm/16-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0THEY'RE BACK!!!THESE WHEELS ARE SOLD SINGLYTenshodo 12 volt CORELESS motor-bogie 26.0mm wheelbase
This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels
BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs16mm Bogie wheels - 12-spoke
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H08 x Crank pins for driving wheels
Set of 8 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS14mm Bogie wheels - 12-spoke
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H06 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SEE EBAY LISTING = MAX 5 Packs per Customer.RESTRICTED TO 5 PACKS PER CUSTOMER.Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.
Includes two brass fixing nuts. ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.
Includes two brass fixing nutsONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,Romford 16.5mm Axle (1/8" diameter)
MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33
ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,16mm Wagon/Coach/Tender wheels - 12-spoke
ABS centres, nickel tyres,
26mm Pin-point 2mm axlePrice is for one axle with 2 wheels 4 feet in 00 139.2cm in H0
