[sd.hide]-->
Product Sections
Main Pages
Best Sellers
40:1 Gearset 3/16" wheel bore/2.0mm worm
This set is designed for 'O'-gauge models.
Gearwheel 16.65mm - 3/16" bore : Worm 6.3mm - 2mm boreDo you require a wheel, worm & mount? If so, see SLGS11.Owing to the current closure of Markits, following Mark's death,we are currently only supplying these components with a purchase of Scale Link wheels.When the future of Markits is known, we will review the situation.Etched de-insulating pick-ups for Scale Link Driving Wheels x 6
4 x Threaded crankpins & slotted retainers.
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS21mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0THESE WHEELS ARE SOLD SINGLY1:43 Leyland Tiger Single deck bus with ECW body
We have produced a new kit of this iconic bus.
They are available to order now - delivery from 25th May 2025..For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costsPicture of model arriving shortly.Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC
This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels
BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costs25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.
Set of 25 retainers for standard crankpins..
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS24mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1
This pack contains 2 x 24mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more
Markits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more