Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Mashima 1220D Motor

Mashima 1220D Motor

25.92/29.81

L = 20mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

Romford DeLuxe Crankpin sets (8)

Romford DeLuxe Crankpin sets (8)

7.50/8.63


find out more

Markits gearbox/motor-mount

Markits gearbox/motor-mount

4.80/5.52

Designed for use with motors with 8mm spacing between mounting screws.

(Mashima 12xx series/Hanazono) 8.5mm wide - Romford 20-series gears.
find out more

25 x Standard crankpin fixing washers

2.40/2.76


find out more

Romford DeLuxe Outside Cranks x 2

Romford DeLuxe Outside Cranks x 2

4.68/5.38


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

`HO/OO' Shinohara Track & Pointwork Code 100

Scalelink |  `HO/OO' Shinohara Track & Pointwork Code 100

Page:  1  2  3   >   >>   View All (34) Page:  1  2  3   >   >>   View All (34)

1 metre Nickel-Silver Flexi-track Wood sleeper

1 metre Nickel-Silver Flexi-track Wood sleeper

Ref: SDG115

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

SDG115 / SDG117 / SDG185 have Code 100 rail

ONLY39 remailing

Price: 7.44/8.56 (Including VAT at 20%)

10 metre Nickel-Silver Flexi-track Wood sleeper

10 metre Nickel-Silver Flexi-track Wood sleeper

Ref: SDG115B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

SDG115 / SDG117 / SDG185 have Code 100 rail

ONLY 3 remaining

Price: 74.10/85.22 (Including VAT at 20%)

1 metre Flexi-track with double guard rail Wood sleeper

1 metre Flexi-track with double guard rail Wood sleeper

Ref: SDG117

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

SDG115 / SDG117 / SDG185 have Code 100 rail

ONLY 5 remaining

Price: 12.00/13.80 (Including VAT at 20%)

1 metre Nickel-silver Flexi-track Concrete Sleeper

1 metre Nickel-silver Flexi-track Concrete Sleeper

Ref: SDG185

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

SDG115 / SDG117 / SDG185 have Code 100 rail

ONLY 6 remaining

Price: 6.60/7.59 (Including VAT at 20%)

10 metre Nickel-silver Flexi-track Concrete Sleeper

10 metre Nickel-silver Flexi-track Concrete Sleeper

Ref: SDG185B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

SDG115 / SDG117 / SDG185 have Code 100 rail

ONLY 2 remaining

(£50.00 = $66.50 = €61.50] as at 15/09/16)

Price: 63.60/73.14 (Including VAT at 20%)

Code 100 metal rail-joiners x 50

Code 100 metal rail-joiners x 50

Ref: SDG141

Price: 8.04/9.25 (Including VAT at 20%)

Code 100 insulating rail joiners x 12

Code 100 insulating rail joiners x 12

Ref: SDG142

Price: 1.80/2.07 (Including VAT at 20%)

Code 100 No 4 Turnout - Left

Code 100 No 4 Turnout - Left

Ref: SDG101

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

ONLY 16 remaining

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 17.40/20.01 (Including VAT at 20%)

Code 100 No 4 Turnout - Right

Code 100 No 4 Turnout - Right

Ref: SDG102

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

ONLY 10 remaining

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 17.40/20.01 (Including VAT at 20%)

Code 100 No 5 Turnout - Left

Code 100 No 5 Turnout - Left

Ref: SDG191

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 8 remaining

Price: 17.40/20.01 (Including VAT at 20%)

Code 100 No 5 Turnout - Right

Code 100 No 5 Turnout - Right

Ref: SDG192

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 11 remaining

Price: 17.40/20.01 (Including VAT at 20%)

Code 100 No 6 Turnout - Left

Code 100 No 6 Turnout - Left

Ref: SDG103

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm/43" : Length 30.0cm 12" ; Frog 9.30 degrees.

ONLY 12 remaining

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 17.40/20.01 (Including VAT at 20%)

Scalelink |  `HO/OO' Shinohara Track & Pointwork Code 100

Buy now with PayPal