Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21

Available again.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

3.90/4.49

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm.

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

3.90/4.49

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm.

THESE WHEELS ARE SOLD SINGLY
find out more

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM+ NARROW MOUNT

40:1 Gearset 1/8

14.40/16.56

Markits gearset MM210/20401N
find out more

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (3mm diameter)

1.62/1.86

MRAX-00/3pss stainless 3mm diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

0-scale MTH Controllers & Accessories-Retail only

Scalelink | 0-scale MTH Controllers & Accessories-Retail only

MTH DCS accessory interface unit (AIU).

MTH DCS accessory interface unit (AIU).

Ref: 50-1004

Control your railroad turnouts (Switches) and accessories from your handheld by adding this to your MTH DCS system.

Features

Can be used with MTH 50-1001

Price: 119.95/137.94 (Including VAT at 20%)

MTH Protosound 2 Battery Charger

MTH Protosound 2 Battery Charger

Ref: 50-1019

NOTE: As this O-gauge unit is designed for the American market which uses 120-volt 60-cycle AC current, this unit must be used with a step-down transformer from 240volts to 120volts - DO NOT USE WITHOUT

Price: 15.49/17.81 (Including VAT at 20%)

MTH AA NiCad Proto-sound battery

MTH AA NiCad Proto-sound battery

Ref: 50-1024

Replacement battery for MTH locos fitted with Proto-sound 2.

Price: 10.99/12.64 (Including VAT at 20%)

MTH DCS Remote Commander set

MTH DCS Remote Commander set

Ref: 50-1033

For shipping, please select "Small boxed kits" as this pack is too big for "Large letter post"

The DCS Remote Commander is an inexpensive wireless solution capable of accessing the most popular command control functions programmed into Proto-Sound locomotives.* The DCS Remote Commander handheld controller features clearly labeled, one-button control of 9 engine functions. There are no function keys or special codes to remember. Access the locomotive whistle or horn, bell, smoke, direction and speed with just a single button push. You can also access Passenger Station or Freight Yard Proto-Effects, engine startup and shutdown sounds and control the front or rear Proto-Couplers with this lightweight, easy-to-use remote.

Adding a DCS Remote Commander to your existing layout is simple: just plug your power supply into the DCS Remote Commander receiver and the output wires from the receiver to your track lockon. The DCS Remote Commander can accept any power input (AC or DC) up to 20 volts and 8 amps making it a perfect choice for small and moderately sized layouts.

Price: 59.95/68.94 (Including VAT at 20%)

Scalelink | 0-scale MTH Controllers & Accessories-Retail only

Buy now with PayPal