Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

£60.00/$75.00

This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels

BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).

Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Rover 6hp tourer 1906

Rover 6hp tourer 1906

£18.00/$22.50

(6cv torpedo - Kabriolett)

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs


find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL8 x 1

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Hanazono 12 volt DC 5-pole motor

Hanazono 12 volt DC 5-pole motor

£18.00/$22.50

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Fixings 10mm apart.
find out more

`HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages

Scalelink |  `HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages

Show First 12 Product(s) Show First 12 Product(s)

1 metre Flexi-track Code 70 `HOn3'

1 metre Flexi-track Code 70 `HOn3'

Ref: SDG415

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Only 8 remaining - 26/11/2020

Price: £6.90/$8.63 (Including VAT at 20%)

10 metres Flexi-track code 70 'HOn3'

10 metres Flexi-track code 70 'HOn3'

Ref: SDG415B

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Sorry - all gone

Price: £66.00/$82.50 (Including VAT at 20%)

Code 70 No 4 Turnout - Left = H0n3

Code 70 No 4 Turnout - Left = H0n3

Ref: SDG401

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONE available 12/09/2024

Only 1 remaining - 12/09/2022

Price: £19.80/$24.75

Code 70 No 4 Turnout - Right = H0n3

Code 70 No 4 Turnout - Right = H0n3

Ref: SDG402

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

4 available 12/09/2024

Only 1 remaining - 12/09/2022

Price: £19.80/$24.75

Code 70 No 6 Turnout - Left = H0n3

Code 70 No 6 Turnout - Left = H0n3

Ref: SDG403

JANUARY 2025 - NEW DELIVERY OF GENUINE SHINOHARA TURNOUTS.

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 7 remaining - 12/09/2022

Price: £18.00/$22.50

Code 70 No 6 Turnout - Right = H0n3

Code 70 No 6 Turnout - Right = H0n3

Ref: SDG404

JANUARY 2025 - NEW DELIVERY OF GENUINE SHINOHARA TURNOUTS.

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining - 12/09/2022

Price: £18.00/$22.50

30 degree crossing = H0n3

30 degree crossing = H0n3

Ref: SDG430

Only 2 remaining - 12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

45 degree crossing = H0n3

45 degree crossing = H0n3

Ref: SDG431

Only 12 remaining - 12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

60 degree crossing = H0n3

60 degree crossing = H0n3

Ref: SDG432

Only 6 remaining - 12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

90 degree crossing = H0n3

90 degree crossing = H0n3

Ref: SDG433

Only 14 remaining - 12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

Code 70 No 3 turnout - Y = H0n3

Code 70 No 3 turnout - Y = H0n3

Ref: SDG493

JANUARY 2025 - NEW DELIVERY OF GENUINE SHINOHARA TURNOUTS.

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

SORRY - ALL GONE

Only 7 remaining - 12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

1 metre Dual-gauge flexi-track Code 70

1 metre Dual-gauge flexi-track Code 70

Ref: SDG465

NOTE: Track cannot be sent in the UK by Royal Mail. The courier cost for up to 10 metres is £10.00 plus VAT.

Standard postal rates do NOT apply - SELECT FLEXI-TRACK in shipping - If you buy turnouts as well, use FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

FOR JOINERS SEE `N' SECTION

Sorry - all gone

Price: £9.12/$11.40 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - LEFT Type 1 - Narrow gauge to left

Code 70 No 6 Dual Turnout - LEFT Type 1 - Narrow gauge to left

Ref: SDG450

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping.

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £33.00/$41.25 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - LEFT Type 2 - Narrow gauge to right

Code 70 No 6 Dual Turnout - LEFT Type 2 - Narrow gauge to right

Ref: SDG451

SORRY - ALL GONE

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - RIGHT Type 2 - Narrow gauge to right

Code 70 No 6 Dual Turnout - RIGHT Type 2 - Narrow gauge to right

Ref: SDG452

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - RIGHT Type 1 - Narrow gsuge to left

Code 70 No 6 Dual Turnout - RIGHT Type 1 - Narrow gsuge to left

Ref: SDG453

SORRY - ALL GONE

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Transition track - Left-hand

Transition track - Left-hand

Ref: SDG470

Only 5 remaining - 12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Transition track - Right Hand

Transition track - Right Hand

Ref: SDG471

Only 5 remaining - 12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Scalelink |  `HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages