Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.

MAXIMUM ONE PACK PER CUSTOMER
find out more

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SOLD OUT
find out more

M1.6 x 2mm Steel Grub-screws x 10

M1.6 x 2mm Steel Grub-screws x 10

£3.60/$4.50


find out more

24 x Threaded crankpins & slotted retainers.

£33.00/$41.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

`HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages (10.5mm gauge)

Scalelink |  `HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages (10.5mm gauge)

Page:   <<   <  1  2   View All (18) Page:   <<   <  1  2   View All (18)

Code 70 No 6 Dual Turnout - LEFT Type 1 - Narrow gauge to left

Code 70 No 6 Dual Turnout - LEFT Type 1 - Narrow gauge to left

Ref: SDG450

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping.

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £33.00/$41.25 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - LEFT Type 2 - Narrow gauge to right

Code 70 No 6 Dual Turnout - LEFT Type 2 - Narrow gauge to right

Ref: SDG451

SORRY - ALL GONE

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - RIGHT Type 2 - Narrow gauge to right

Code 70 No 6 Dual Turnout - RIGHT Type 2 - Narrow gauge to right

Ref: SDG452

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Code 70 No 6 Dual Turnout - RIGHT Type 1 - Narrow gsuge to left

Code 70 No 6 Dual Turnout - RIGHT Type 1 - Narrow gsuge to left

Ref: SDG453

SORRY - ALL GONE

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

They have a radius of 109 cm. (43" approx).

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining - 26/11/2020

Price: £33.60/$42.00 (Including VAT at 20%)

Transition track - Left-hand

Transition track - Left-hand

Ref: SDG470

Only 5 remaining - 12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Transition track - Right Hand

Transition track - Right Hand

Ref: SDG471

Only 5 remaining - 12/09/2022

Price: £14.40/$18.00 (Including VAT at 20%)

Scalelink |  `HOn3' Code 70 Shinohara Track & Pointwork / Aiguillages (10.5mm gauge)