Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford TT axle

Romford TT axle

£2.00/$2.50

This axle is not intended for use with TT120 For spacing washers see WPY33

For TT 12mm track. Can also be used for H0m 12mm track

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SEE EBAY LISTING = MAX 5 Packs per Customer.

RESTRICTED TO 5 PACKS PER CUSTOMER.
find out more

14mm Wagon/Coach/Tender wheels - 12-spoke

14mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

Tenshodo 12 volt CORELESS motor-bogie 26.0mm wheelbase

£60.00/$75.00

This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels

BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).

Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Hanazono 12 volt motor bogie 26.0mm wheelbase

Hanazono 12 volt motor bogie 26.0mm wheelbase

£46.80/$58.50

Fitted with 12.0mm disc wheels.

BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Sundries = Motors etc

Scalelink |  Sundries = Motors etc

Show First 12 Product(s) Show First 12 Product(s)

Scale Link 12v Coreless Motor

Scale Link 12v Coreless Motor

Ref: SL-CM2517S

Technical data:-

25mm long x 17mm round with single 1mm shaft, 4.8mm long.

Mounting hole spacing 10mm. M2 screws - see listing below (SM-MMS02)

Made in China.

Price: £30.00/$37.50 (Including VAT at 20%)

Scale Link 12v DC 5-pole Motor

Scale Link 12v DC 5-pole Motor

Ref: SL-CM2820D

Technical data:-

25mm long x 20mm x 15mm with a double 1.5mm shaft 8.5mm long.

Mounting hole spacing 12.5mm. M2 screws -see listing below (SM-MMS02)

Made in China.

Price: £18.00/$22.50 (Including VAT at 20%)

Scale Link 12v DC 5-pole motor 1220D

Scale Link 12v DC 5-pole motor 1220D

Ref: SL-IM1220

Technical data:-

20mm long x 12mm tall x 10mm wide with double 1.5mm shafts, 9mm long.

Mounting hole spacing 8.5mm.. Requires M1.4 mounting screws - see listing SM-MMS01

Made in Japan.

This is an ideal replacement for the Mashima SM-MHK1220D

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £16.20/$20.25 (Including VAT at 20%)

Canon 12volt DC 3-pole motor with double shafts

Canon 12volt DC 3-pole motor with double shafts

Ref: Canon-CN16-0640

The motor measures 34mm x 16mm x 14.6mm and has a 1.5mm shaft.

Fixing is by 2 x M1.7 x 2.0mm bolts which are NOT included - SEE SM-MMS06.

Rated speed 6900 rpm on load. 40ma current load. Fixing centres 11mm

Overall length including the double shafts is 47.7mm.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £27.00/$33.75 (Including VAT at 20%)

Canon 12volt DC 5-pole motor

Canon 12volt DC 5-pole motor

Ref: CANON-CN22

The motor measures 32.8mm x 22mm x18mm and has 2.0mm shaft.

Overall length, including the double shafts is 64.70mm

Fixing is by 2 x M2 x 2.0mm bolts which are NOT included - SEE SM-MMS02.

Rated speed 11200 rpm off load. 40ma current load. Fixing centres 15mm

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £30.00/$37.50 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor

Hanazono 12 volt DC 5-pole motor

Ref: SM-H1024D

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Fixings 10mm apart.

Price: £18.00/$22.50 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH21]

Hanazono 12 volt DC 5-pole motor [LH21]

Ref: SM-H881

Length over body 21mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £64.80/$81.00 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH19]

Hanazono 12 volt DC 5-pole motor [LH19]

Ref: SM-H882

Length over body 19mm. Height 13mm. Width 9.6mm.

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £18.00/$22.50 (Including VAT at 20%)

Hanazono 12 volt DC 5-pole motor [LH17]

Hanazono 12 volt DC 5-pole motor [LH17]

Ref: SM-H883

Length over body 17mm. Height 13mm. Width 9.6mm

Length over shafts 35mm. Mounting holes 8mm apart.

Shaft diameter is 1.5mm. Mounting screws M1.4 x 2mm (SM-MMS01)

Price: £18.00/$22.50 (Including VAT at 20%)

Hanazono motor brushes & springs

Hanazono motor brushes & springs

Ref: SM-MB01

Pack contains 2 brushes & 2 springs

Price: £4.80/$6.00 (Including VAT at 20%)

Mashima 1015D Motor

Mashima 1015D Motor

Ref: SM-MHK1015

L = 15mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 35mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1020D Motor

Mashima 1020D Motor

Ref: SM-MHK1020

L = 20mm. W = 10mm. D = 12mm. Fixing spacing holes 8.5mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 10xx-series Motor Brush x 2

Mashima 10xx-series Motor Brush x 2

Ref: SM-MHK10xx

Price: £6.00/$7.50 (Including VAT at 20%)

Mashima 1220D Motor

Mashima 1220D Motor

Ref: SM-MHK1220

L = 20mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 40mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1224D Motor

Mashima 1224D Motor

Ref: SM-MHK1224

L = 24mm. W = 12mm. D = 14mm. Fixing spacing holes 8mm

Overall length 44mm - 1.5mm shaft

NOW WITH 2 x M1.4 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 12xx-series Motor Brush x 2

Mashima 12xx-series Motor Brush x 2

Ref: SM-MHK12xx

Price: £3.60/$4.50 (Including VAT at 20%)

Mashima 12xx-series Motor Brush & Spring x 2

Mashima 12xx-series Motor Brush & Spring x 2

Ref: SM-MHK12BS

Sorry sold out.. Brush available - no springs...

Price: £6.00/$7.50 (Including VAT at 20%)

Mashima M-16K-S

Mashima M-16K-S

Ref: SM-M16K-S

5-pole open-frame motor. Size 16mm x 13mm x 9.3mm. 10mm single shaft

Includes 2 x M1.4 screws.

ALL GONE - SEE Hanazono above

Price: £16.80/$21.00 (Including VAT at 20%)

Mashima 1620D motor

Mashima 1620D motor

Ref: SM-MHK1620

L = 20mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 40mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

All Gone..

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1624D motor

Mashima 1624D motor

Ref: SM-MHK1624

L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 44mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £42.00/$52.50 (Including VAT at 20%)

Mashima 1626DX motor

Mashima 1626DX motor

Ref: SM-MHK1626DX

L = 26mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £45.00/$56.25 (Including VAT at 20%)

Mashima 1628D motor

Mashima 1628D motor

Ref: SM-MHK1628

L = 28mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £45.00/$56.25 (Including VAT at 20%)

Mashima 1630D motor

Mashima 1630D motor

Ref: SM-MHK1630

NEW LARGE MOTOR from Mashima.

L = 30mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 50mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

Price: £45.00/$56.25 (Including VAT at 20%)

Mashima 16xx-series Motor Brush

Mashima 16xx-series Motor Brush

Ref: SM-MHK16xx

Price: £4.80/$6.00 (Including VAT at 20%)

Mashima 1830D motor + 2 screws & suppressor

Mashima 1830D motor + 2 screws & suppressor

Ref: SM-MHK1830D-EP

L = 30mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 50mm - shaft 2mm. NOW WITH 2 x M2 Screws & Suppressor

These motors have 10mm shafts.

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £51.00/$63.75 (Including VAT at 20%)

Mashima 1833D Motor

Mashima 1833D Motor

Ref: SM-MH1833

L = 33mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 53mm - shaft 2mm. NOW WITH 2 x M2 SCREWS

These motors have 10mm shafts.

Please note that we are limiting ALL customers to 2 of any Mashima motor to make them available

to as many modellers as possible.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £54.00/$67.50 (Including VAT at 20%)

Scalelink |  Sundries = Motors etc