Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£2.00/$2.50

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

16mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£12.00/$15.00

This pack contains 2 x 16mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Driver

Driver

£10.50/$13.13

For SMEB/VK06. Has Steel helmet, Bandolier and respirator.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

Markits Crankpin Bushes x 10

Markits Crankpin Bushes x 10

£2.88/$3.60

Ideal for bushing connecting rods etc

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

OO-scale (1:76) Smiths Components

Scalelink | OO-scale (1:76) Smiths Components

Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (76) Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (76)

G.W.R. Fence Posts for WSF03

G.W.R. Fence Posts for WSF03

Ref: WTSA05

Price: £1.80/$2.25 (Including VAT at 20%)

L.M.S. Load Gauge Bow

L.M.S. Load Gauge Bow

Ref: WTSA06

Price: £3.60/$4.50 (Including VAT at 20%)

L.M.S. Load Gauge Bow (MID)

L.M.S. Load Gauge Bow (MID)

Ref: WTSA07

Price: £3.60/$4.50 (Including VAT at 20%)

L.M.S. Load Gauge Bow (LNWR)

L.M.S. Load Gauge Bow (LNWR)

Ref: WTSA08

Price: £3.60/$4.50 (Including VAT at 20%)

Midland Load Gauge Bow

Midland Load Gauge Bow

Ref: WTSA09

Price: £3.60/$4.50 (Including VAT at 20%)

Etched Alphabet Letters

Etched Alphabet Letters

Ref: WTSA10

Letter are 4mm High

Price: £6.00/$7.50 (Including VAT at 20%)

G.W.R. Station Name Board Post

G.W.R. Station Name Board Post

Ref: WTSA11

Price: £3.60/$4.50 (Including VAT at 20%)

Weighbridge Guard Rails x 2

Weighbridge Guard Rails x 2

Ref: WTSA12

The guard rails are 70mm long.

Price: £3.60/$4.50 (Including VAT at 20%)

Fixed W-Iron Fret

Fixed W-Iron Fret

Ref: WTSA13

One pair.

Price: £6.00/$7.50 (Including VAT at 20%)

Moving W-Iron Fret

Moving W-Iron Fret

Ref: WTSA14

One pair.

Price: £6.00/$7.50 (Including VAT at 20%)

Etched Checker Plate

Etched Checker Plate

Ref: WTSA15

See MINI10

Price: £6.00/$7.50 (Including VAT at 20%)

Etched Diamond Plate

Etched Diamond Plate

Ref: WTSA16

See MINI11

Price: £6.00/$7.50 (Including VAT at 20%)

Scalelink | OO-scale (1:76) Smiths Components