Product Sections

Main Pages

Best Sellers

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY

find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

8 x Crank pins for driving wheels

£9.60/$12.00

Set of 8 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

MARKITS 12.5mm / 10-spoke BOGIE WHEELSET

£5.56/$6.95

METAL centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

12.5mm = 3 feet 2" in 00 = 1087cm in H0
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Markits Crankpin Bushes x 10

Markits Crankpin Bushes x 10

£2.88/$3.60

Ideal for bushing connecting rods etc

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

`HO/OO' Code 100 Shinohara Track & Pointwork (16.5mm gauge)

Scalelink |  `HO/OO' Code 100 Shinohara Track & Pointwork (16.5mm gauge)

Page:   <<   <  1  2  3   View All (33) Page:   <<   <  1  2  3   View All (33)

Code 100 No 6 Double Crossover

Code 100 No 6 Double Crossover

Ref: SDG112

-New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

LENGTH 490mm (19.29Inches) 9.30-degree No 6 radius.

Price: £66.00/$82.50 (Including VAT at 20%)

Code 100 No 6 Double Slip

Code 100 No 6 Double Slip

Ref: SDG114

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 30.8cm Radius 1092mm/43"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £66.00/$82.50 (Including VAT at 20%)

Code 100 Diamond Crossing 30-degree

Code 100 Diamond Crossing 30-degree

Ref: SDG130

Only 5 remaining -17/12/2025

Price: £20.40/$25.50 (Including VAT at 20%)

Code 100 Diamond Crossing 45-degree

Code 100 Diamond Crossing 45-degree

Ref: SDG131

-New production - new Prices

Price: £20.40/$25.50 (Including VAT at 20%)

Code 100 Diamond Crossing 60-degree

Code 100 Diamond Crossing 60-degree

Ref: SDG132

Only 11 remaining -17/12/2025

Price: £20.40/$25.50 (Including VAT at 20%)

Code 100 Crossing 90-degree

Code 100 Crossing 90-degree

Ref: SDG133

-New production - new Prices

Price: £20.40/$25.50 (Including VAT at 20%)

Code 100 Diamond Crossing - Left 9.30-degree

Code 100 Diamond Crossing - Left 9.30-degree

Ref: SDG134

-New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 41cm : Frog 9.30 degrees to match No 6 Turnouts

All gone

Price: £28.80/$36.00 (Including VAT at 20%)

Code 100 Diamond Crossing - Right 9.30-degree

Code 100 Diamond Crossing - Right 9.30-degree

Ref: SDG135

-New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 41cm : Frog 9.30 degrees to match No 6 Turnouts

Only 1 remaining -17/12/2025

Price: £28.80/$36.00 (Including VAT at 20%)

Convertor Track Code 100 to Code 83

Convertor Track Code 100 to Code 83

Ref: SDG897

-New production - new Prices

This rail is 157mm long.

Price: £7.20/$9.00 (Including VAT at 20%)

Scalelink |  `HO/OO' Code 100 Shinohara Track & Pointwork (16.5mm gauge)