Product Sections

Main Pages

Best Sellers

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

MG 'TC' Wheels - set of 5

MG 'TC' Wheels - set of 5

£20.95/$26.19

Cast 24mm wheel, 30mm x 5mm tyre, pack of 5

Etched spokes - these wheels are in kit form to be assembled.
find out more

1:76 German Crosses

£3.00/$3.75

See ST1012 for picture

An etched brass, reusable stencil.
find out more

OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Show First 12 Product(s) Show First 12 Product(s)

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

Ref: SWD1

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.

Price: £2.40/$3.00 (Including VAT at 20%)

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Ref: SWD1-6

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..

Price: £6.90/$8.63 (Including VAT at 20%)

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

Ref: SW1212D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm. 3 feet in 00 - 104.4cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

Ref: SW1312D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

Ref: SW1412D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke GROOVED Driving wheel x 1

14mm/12-spoke GROOVED Driving wheel x 1

Ref: SW1412DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Details as SW1412D above but tyre grooved to take rubber tyre

Diameter of drum is 14mm.

THESE WHEELS ARE SOLD SINGLY

Price: £4.32/$5.40 (Including VAT at 20%)

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

Ref: SW1512D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

Ref: SW1612D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

17mm/12-spoke driving wheel x 1

17mm/12-spoke driving wheel x 1

Ref: SW1712D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Release: JUNE 2020.

Diameter of drum is 17mm. 4 feet 3 inches in 00 147.9cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

Ref: SW1816D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

Ref: SW1816DX

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke GROOVED driving wheel x 1

18mm/16-spoke GROOVED driving wheel x 1

Ref: SW1816DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

With groove for fitting a traction tyre - Diameter of drum is 18mm.

THESE WHEELS ARE CURRENTLY UNAVAILABLE

Price: £4.56/$5.70 (Including VAT at 20%)

19mm/16-spoke driving wheel x 1

19mm/16-spoke driving wheel x 1

Ref: SW1916D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles.

Diameter of drum is 19mm. 4 feet 9 inches in 00 165.3cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

Ref: SW2017D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

20mm/17-spoke GROOVED driving wheel x 1

20mm/17-spoke GROOVED driving wheel x 1

Ref: SW2017DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Details as SW2017 above but tyre grooved to take rubber tyre

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY

WITHDRAWN

Price: £5.10/$6.38 (Including VAT at 20%)

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

Ref: SW2117D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

Ref: SW2218D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

23mm/18-spoke Driving wheel x 1

23mm/18-spoke Driving wheel x 1

Ref: SW2318D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

Ref: SW2418D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

25mm/18-spoke Driving wheel x 1

25mm/18-spoke Driving wheel x 1

Ref: SW2518D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: APRIL 2014

Diameter of drum is 25mm. 6 feet 3 inches in 00 217.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

26mm/20-spoke Driving wheel x 1

26mm/20-spoke Driving wheel x 1

Ref: SW2620D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 26mm. 6 feet 6 inches in 00 226.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

Markits 32mm / 24-spoke insulated driving wheel x 1

Markits 32mm / 24-spoke insulated driving wheel x 1

Ref: MR32-24I

This the 8-foot driver with insulated rim. Use with MR32-24P.

Diameter of drum is 32mm 8 feet in 00 278.4cm in H0

Price: £6.30/$7.88 (Including VAT at 20%)

Markits 32mm / 24-spoke non-insulated driving wheel x 1

Markits 32mm / 24-spoke non-insulated driving wheel x 1

Ref: MR32-24P

This the 8-foot driver with non-insulated rim. Use with MR32-24I.

Diameter of drum is 32mm

Price: £6.30/$7.88 (Including VAT at 20%)

Markits 32mm / 24-spoke driving wheels x 1 set

Markits 32mm / 24-spoke driving wheels x 1 set

Ref: MR32set

A set comprises one insulated and one non-insulated wheel plus one standard 16.5mm 1/8" axle.

{MR32-24I plus MR32-24P plus RMA165}

Price: £15.00/$18.75 (Including VAT at 20%)

Plated steel pick-up wire - 4 feet

Plated steel pick-up wire - 4 feet

Ref: BPW02

Spring wire.

Price: £1.44/$1.80 (Including VAT at 20%)

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

Ref: WPY41

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £7.20/$9.00 (Including VAT at 20%)

8 x Crank pins for driving wheels

8 x Crank pins for driving wheels

Ref: WPY41A

Set of 8 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £9.60/$12.00 (Including VAT at 20%)

24 x Crank pins for driving wheels

24 x Crank pins for driving wheels

Ref: WPY41B

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £27.00/$33.75 (Including VAT at 20%)

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

Ref: WPY41C

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £4.80/$6.00 (Including VAT at 20%)

6 x Threaded crankpins & slotted retainers

6 x Threaded crankpins & slotted retainers

Ref: WPY41D

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £9.00/$11.25 (Including VAT at 20%)

24 x Threaded crankpins & slotted retainers.

24 x Threaded crankpins & slotted retainers.

Ref: WPY41E

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £33.00/$41.25 (Including VAT at 20%)

4 x Threaded crankpins & slotted retainers.

4 x Threaded crankpins & slotted retainers.

Ref: WPY41F

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £6.50/$8.13 (Including VAT at 20%)

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins