Product Sections

Main Pages

Best Sellers

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£6.90/$8.63

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

MG 'TC' Wheels - set of 5

MG 'TC' Wheels - set of 5

£20.95/$26.19

Cast 24mm wheel, 30mm x 5mm tyre, pack of 5

Etched spokes - these wheels are in kit form to be assembled.
find out more

1:76 German Crosses

£3.00/$3.75

See ST1012 for picture

An etched brass, reusable stencil.
find out more

The specified product reference (M4CRNK.PB) couldn't be found.

Please wait for your browser to forward you to the next page or click here.