Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.

MAXIMUM ONE PACK PER CUSTOMER
find out more

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SOLD OUT
find out more

M1.6 x 2mm Steel Grub-screws x 10

M1.6 x 2mm Steel Grub-screws x 10

£3.60/$4.50


find out more

24 x Threaded crankpins & slotted retainers.

£33.00/$41.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Vehicle Accessories 1:35

Scalelink | WW2 (1:35) Lead Sled Models - Military |  Vehicle Accessories 1:35

Steering wheels, etc 1/35

Steering wheels, etc 1/35

Ref: LSAP01

2 x Steering wheels (13.5mm diameter), 2 x gearsticks, 2 x mirrors & 1 x bridgeplate

Price: £4.20/$5.25 (Including VAT at 20%)

Rifles & mounting clips 1/35

Rifles & mounting clips 1/35

Ref: LSAP02

3 rifles & 2 clips

Price: £4.20/$5.25 (Including VAT at 20%)

Ground anchors, pins, clamps etc 1/35

Ground anchors, pins, clamps etc 1/35

Ref: LSAP03

2 of each

Price: £3.00/$3.75 (Including VAT at 20%)

Bottle Jacks x 5 1/35

Bottle Jacks x 5 1/35

Ref: LSAP04

Price: £4.20/$5.25 (Including VAT at 20%)

Mallet & pickaxe 1/35

Mallet & pickaxe 1/35

Ref: LSAP05

1 of each

Price: £3.30/$4.13 (Including VAT at 20%)

P.O.W.cans x 2 packs of 3 1/35

P.O.W.cans x 2 packs of 3 1/35

Ref: LSAP06

Price: £3.30/$4.13 (Including VAT at 20%)

Tow-bar with hook, lock bars, towing eyes 1/35

Tow-bar with hook, lock bars, towing eyes 1/35

Ref: LSAP07

Price: £3.00/$3.75 (Including VAT at 20%)

Air filters x 2 1/35

Air filters x 2 1/35

Ref: LSAP08

Price: £3.00/$3.75 (Including VAT at 20%)

Box/tray handles x 8

Box/tray handles x 8

Ref: LSAP09

Price: £3.00/$3.75 (Including VAT at 20%)

Headlamps x 2 - Side/rearlamps x 4 1/35

Headlamps x 2 - Side/rearlamps x 4 1/35

Ref: LSAP10

Price: £4.20/$5.25 (Including VAT at 20%)

Breakdown crane jib, pulley etc 1/35

Breakdown crane jib, pulley etc 1/35

Ref: LSAP11

New batch 12-11-2024

For shipping you must select "Small boxed kits or Special Delivery" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.00/$15.00 (Including VAT at 20%)

Morris CS8 Wheelset 1/35

Morris CS8 Wheelset 1/35

Ref: LSAP12

Contains: 2 front wheels, front axle, track rod, 2 rear wheels, rear axle, spare wheel

Price: £18.00/$22.50 (Including VAT at 20%)

Scalelink | WW2 (1:35) Lead Sled Models - Military |  Vehicle Accessories 1:35