Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

26mm/20-spoke Driving wheel x 1

26mm/20-spoke Driving wheel x 1

4.32/4.97

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 26mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Markits BR Return Crank Set

Markits BR Return Crank Set

9.16/10.53

A pair of Stainless Steel return cranks for Walschaerts vale gears.

Markits reference is M4CRNKPRtnBRs = BR SKEFCO type
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

`N' Alchin Traction Engine

`N' Alchin Traction Engine

8.40/9.66

A delightful model of the popular Alchin. Kit contains 10 parts.

2mm scale only.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

7.50/8.63


find out more

12mm Bogie wheels - 8-spoke

12mm Bogie wheels - 8-spoke

4.20/4.83

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels
find out more

10.5mm Bogie wheels - 8-spoke

10.5mm Bogie wheels - 8-spoke

4.20/4.83

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels


find out more

Sundries = Gear-sets, Motors etc

Scalelink |  Sundries = Gear-sets, Motors etc

Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (63) Page:   <<   <  1  2  3  4  5  ...   >   >>   View All (63)

Mashima 12xx-series Motor Brush x 2

Mashima 12xx-series Motor Brush x 2

Ref: SM-MHK12xx

Price: 2.40/2.76 (Including VAT at 20%)

Mashima 12xx-series Motor Brush & Spring x 2

Mashima 12xx-series Motor Brush & Spring x 2

Ref: SM-MHK12BS

Price: 3.96/4.55 (Including VAT at 20%)

Mashima M-16K-S

Mashima M-16K-S

Ref: SM-M16K-S

5-pole open-frame motor. Size 16mm x 13mm x 9.3mm. 10mm single shaft

Includes 2 x M1.4 screws.

ALL GONE - SEE Hanazono above

Price: 16.80/19.32 (Including VAT at 20%)

Mashima 1620D motor

Mashima 1620D motor

Ref: SM-MHK1620

L = 20mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 40mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

BACK IN STOCK

Price: 30.00/34.50 (Including VAT at 20%)

Mashima 1624D motor

Mashima 1624D motor

Ref: SM-MHK1624

L = 24mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 44mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

DISCONTINUED

Price: 30.00/34.50 (Including VAT at 20%)

Mashima 1626DX motor

Mashima 1626DX motor

Ref: SM-MHK1626

L = 26mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Last few available....

Price: 36.00/41.40 (Including VAT at 20%)

Mashima 1628D motor

Mashima 1628D motor

Ref: SM-MHK1628

L = 28mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 48mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Price: 30.00/34.50 (Including VAT at 20%)

Mashima 1630D motor

Mashima 1630D motor

Ref: SM-MHK1630

NEW LARGE MOTOR from Mashima.

L = 30mm. W = 13.6mm. H = 15.8mm Fixing spacing holes 8 or 10mm

Overall length = 50mm - shaft 2mm

NOW WITH 2 x M2 SCREWS

Price: 30.00/34.50 (Including VAT at 20%)

Mashima 16xx-series Motor Brush

Mashima 16xx-series Motor Brush

Ref: SM-MHK16xx

Price: 4.36/5.01 (Including VAT at 20%)

Mashima 1833D Motor

Mashima 1833D Motor

Ref: SM-MH1833

L = 33mm. W = 18.4mm. D = 23.2mm. Fixing spacing holes 12mm

Overall length 53mm - shaft 2mm. NOW WITH 2 x M2 SCREWS

These motors have 10mm shafts.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: 30.00/34.50 (Including VAT at 20%)

Mashima 18xx-series Motor Brush x 2

Mashima 18xx-series Motor Brush x 2

Ref: SM-MHK18xx

Price: 3.60/4.14 (Including VAT at 20%)

Mashima 18xx-series Motor Springs x 2

Mashima 18xx-series Motor Springs x 2

Ref: SM-MHK18MS

Hashima Motor 18xx-series springs x 2

Price: 1.20/1.38 (Including VAT at 20%)

Scalelink |  Sundries = Gear-sets, Motors etc

Buy now with PayPal