Product Sections
Main Pages
Best Sellers
Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.
Includes two brass fixing nuts.6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.Etched de-insulating pick-ups for Scale Link Driving Wheels
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.
Fitting & Cutting instructions are included.Pack contains 2 pick-ups, usually sufficient for one locomotive.Markits DeLuxe Crankpin sets (8)
Romford 16.5mm axle for OLDER Triang-Hornby chassis
This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.
Includes two brass fixing nutsRomford 16.5mm Axle (1/8" diameter)
12mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010.Diameter of drum is 12mm.THESE WHEELS ARE SOLD SINGLYMarkits DeLuxe Crankpin sets (6)
Back in stock
find out more
20mm/17-spoke driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 20mm.THESE WHEELS ARE SOLD SINGLYMarkits 1/8th inch axle bush x 12
3.7mm OD x 2mm deep x 1/8th bore.
find out more
