Product Sections

Main Pages

Best Sellers

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is A 9/64th diameter axle for Triang/Hornby chassis without the knurled gear-wheel grip for 16.5mmn track.

Includes two brass fixing nuts.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

1.80/2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

7.50/8.63


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

1.62/1.86

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

3.30/3.80

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm.

THESE WHEELS ARE SOLD SINGLY


find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

3.96/4.55

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

`HO/OO' Shinohara Track & Pointwork Code 83

Scalelink | `HO/OO' Shinohara Track & Pointwork Code 83

Page:   <<   <  1  2  3   View All (35) Page:   <<   <  1  2  3   View All (35)

Code 83 No 10 Turnout - Left

Code 83 No 10 Turnout - Left

Ref: SDG884

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 198mm /78"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 13 remaining

Price: 22.20/25.53 (Including VAT at 20%)

Code 83 No 10 Turnout Right

Code 83 No 10 Turnout Right

Ref: SDG885

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radius 198mm /78"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 16 remaining

Price: 22.20/25.53 (Including VAT at 20%)

Code 83 Three-way turnout

Code 83 Three-way turnout

Ref: SDG808

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Radii 66/87cm / 26/34" : Length 30.8cm / 12.12" : Left frog 9.30 degrees / Right frog 8.10 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 9 remaining

Price: 36.24/41.68 (Including VAT at 20%)

Code 83 No 6 Double Crossover

Code 83 No 6 Double Crossover

Ref: SDG812

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Length 49cm / 19.3" : Frog 9.30 degrees :

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 7 remaining

Price: 57.00/65.55 (Including VAT at 20%)

Code 83 No 6 Double Slip

Code 83 No 6 Double Slip

Ref: SDG814

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Length 45cm / 17.71"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 8 remaining

Price: 50.40/57.96 (Including VAT at 20%)

Code 83 No 8 Double Slip

Code 83 No 8 Double Slip

Ref: SDG896

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Length 45cm / 17.71"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ONLY 7 remaining

Price: 54.00/62.10 (Including VAT at 20%)

Code 83 Diamond crossing - 30 degree

Code 83 Diamond crossing - 30 degree

Ref: SDG830

ONLY 17 remaining

Price: 18.42/21.18 (Including VAT at 20%)

Code 83 Diamond crossing - 45 degree

Code 83 Diamond crossing - 45 degree

Ref: SDG831

ONLY 20 remaining

Price: 18.42/21.18 (Including VAT at 20%)

Code 83 Diamond Crossing - 60 degree

Code 83 Diamond Crossing - 60 degree

Ref: SDG832

ONLY 9 remaining

Price: 18.42/21.18 (Including VAT at 20%)

Code 83 Diamond Crossing - 90 degree

Code 83 Diamond Crossing - 90 degree

Ref: SDG833

ONLY 10 remaining

Price: 18.42/21.18 (Including VAT at 20%)

Convertor Track Code 83 to Code 70

Convertor Track Code 83 to Code 70

Ref: SDG898

ONLY 40 remaining

Price: 5.40/6.21 (Including VAT at 20%)

Scalelink | `HO/OO' Shinohara Track & Pointwork Code 83

Buy now with PayPal