Product Sections

Main Pages

Best Sellers

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

3.60/4.14

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm.

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

7.50/8.63


find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

5.40/6.21

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

5.40/6.21

Back in stock...
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

5.58/6.42

Back in stock
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

1.62/1.86

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

4.20/4.83

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

3.00/3.45

3.7mm OD x 2mm deep x 1/8th bore.
find out more

40:1 Gearset 1/8" WHEEL BORE/1.5mm WORM

40:1 Gearset 1/8

7.50/8.63

Original Romford Gearset

13.3mm wheel : 7.1mm worm.

Markits equivalent MGRS-401

Original Romford gears have shaft centre distance of 0.375" (9.53mm)
find out more

Public servants

Public servants

6.48/7.45

1. The bus driver stretches his legs 2. His conductor grabs a quick fag 3. The inspector has a say again

4. The postman and his bike loaded 5. Another postman all on foot

(Conducteurs de bus et facteurs - Schaffner, Brieftrager)
find out more

`HO/OO' Shinohara DCC-ready Pointwork Code 83 only

Scalelink | `HO/OO' Shinohara DCC-ready Pointwork Code 83 only

Page:   <<   <  1  2  3   View All (26) Page:   <<   <  1  2  3   View All (26)

Code 83 DCC No 6 Single Slip

Code 83 DCC No 6 Single Slip

Ref: SDG8836

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 140cm /55" : Length 40.4cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 47.04/54.10 (Including VAT at 20%)

Code 83 DCC No 8 Double Slip

Code 83 DCC No 8 Double Slip

Ref: SDG8896

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: 57.60/66.24 (Including VAT at 20%)

Scalelink | `HO/OO' Shinohara DCC-ready Pointwork Code 83 only

Buy now with PayPal