Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£2.40/$3.00

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

Markits 1/8th inch axle bush x 12

Markits 1/8th inch axle bush x 12

£3.60/$4.50

3.7mm OD x 2mm deep x 1/8th bore.

MAXIMUM ONE PACK PER CUSTOMER
find out more

24 x Crank pins for driving wheels

£27.00/$33.75

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SOLD OUT
find out more

M1.6 x 2mm Steel Grub-screws x 10

M1.6 x 2mm Steel Grub-screws x 10

£3.60/$4.50


find out more

24 x Threaded crankpins & slotted retainers.

£33.00/$41.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm Wagon/Coach/Tender wheels - 12-spoke

16mm Wagon/Coach/Tender wheels - 12-spoke

£4.86/$6.08

ABS centres, nickel tyres,

26mm Pin-point 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/$7.50

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

`HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)

Scalelink |  `HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)

Show First 12 Product(s) Show First 12 Product(s)

Code 83 DCC No 3 Turnout - Y

Code 83 DCC No 3 Turnout - Y

Ref: SDG8893

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 9 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Left

Code 83 DCC No 4 Turnout - Left

Ref: SDG8801

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Right

Code 83 DCC No 4 Turnout - Right

Ref: SDG8802

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 40.5cm / 15.94" : Length 18.5cm /7.28" ; Frog 14.15 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 4 Turnout - Y

Code 83 DCC No 4 Turnout - Y

Ref: SDG8807

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 10 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Left

Code 83 DCC No 5 Turnout - Left

Ref: SDG8891

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 28cm / 11.02" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Right

Code 83 DCC No 5 Turnout - Right

Ref: SDG8892

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 28cm / 11.02" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 11 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 5 Turnout - Y

Code 83 DCC No 5 Turnout - Y

Ref: SDG8883

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 75cm / 29.53" : Length 26.7cm / 10.5" ; Frog 11.26 degrees.

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 6 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £21.60/$27.00 (Including VAT at 20%)

Code 83 DCC No 6 Turnout - Left

Code 83 DCC No 6 Turnout - Left

Ref: SDG8803

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 6 Turnout - Right

Code 83 DCC No 6 Turnout - Right

Ref: SDG8804

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 109cm / 43" : Length 30cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 12 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 6 Curved Turnout - Left

Code 83 DCC No 6 Curved Turnout - Left

Ref: SDG8826

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/41cm 24"/16.5" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 6 Curved Turnout - Right

Code 83 DCC No 6 Curved Turnout - Right

Ref: SDG8827

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 7 Curved Turnout - Left

Code 83 DCC No 7 Curved Turnout - Left

Ref: SDG8894

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 16 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 7 Curved Turnout - Right

Code 83 DCC No 7 Curved Turnout - Right

Ref: SDG8895

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 16 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 7.5 Curved Turnout - Left

Code 83 DCC No 7.5 Curved Turnout - Left

Ref: SDG8888

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £39.00/$48.75 (Including VAT at 20%)

Code 83 DCC No 7.5 Curved Turnout - Right

Code 83 DCC No 7.5 Curved Turnout - Right

Ref: SDG8889

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 813mm/711mm (32"/28") Length 413mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 6 remaining -12/09/2022

Price: £39.00/$48.75 (Including VAT at 20%)

Code 83 DCC No 8 Turnout - Left

Code 83 DCC No 8 Turnout - Left

Ref: SDG8805

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 8 Turnout - Right

Code 83 DCC No 8 Turnout - Right

Ref: SDG8806

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £24.00/$30.00 (Including VAT at 20%)

Code 83 DCC No 8 Curved Turnout - Left

Code 83 DCC No 8 Curved Turnout - Left

Ref: SDG8828

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 8 Curved Turnout - Left

Code 83 DCC No 8 Curved Turnout - Left

Ref: SDG8828-SH

NOTE: This turnout is NOT ok for small parcel post - select Tracked 48 at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

This pre-owned turnout has been'"rusted" with track-colour paint except the top surface.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 available

Price: £20.00/$25.00

Code 83 DCC No 8 Curved Turnout - Right

Code 83 DCC No 8 Curved Turnout - Right

Ref: SDG8829

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 2 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 8 Curved turnout - Right

Code 83 DCC No 8 Curved turnout - Right

Ref: SDG8829-SH

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

This turnout has been'"rusted" with track-colour paint except the top surface.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 available

Price: £20.00/$25.00

Code 83 DCC No 10 Turnout - Left

Code 83 DCC No 10 Turnout - Left

Ref: SDG8884

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 198mm /78"

Only 5 remaining -12/09/2022

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £28.80/$36.00 (Including VAT at 20%)

Code 83 DCC No 10 Turnout Right

Code 83 DCC No 10 Turnout Right

Ref: SDG8885

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 198mm /78"

Only 5 remaining -12/09/2022

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £28.80/$36.00 (Including VAT at 20%)

Code 83 DCC Three-way turnout

Code 83 DCC Three-way turnout

Ref: SDG8808

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 66/87cm / 26/34" : Length 30.8cm / 12.12" : Left frog 9.30 degrees / Right frog 8.10 degrees

ALL GONE

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £42.00/$52.50 (Including VAT at 20%)

Code 83 DCC No 6 Double Crossover

Code 83 DCC No 6 Double Crossover

Ref: SDG8812

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 49cm / 19.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

ALL GONE

Price: £66.00/$82.50 (Including VAT at 20%)

Code 83 DCC No 6 Double Slip

Code 83 DCC No 6 Double Slip

Ref: SDG8814

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 140cm /55" : Length 39.4cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining -12/09/2022

Price: £62.40/$78.00 (Including VAT at 20%)

Code 83 DCC No 6 Single Slip

Code 83 DCC No 6 Single Slip

Ref: SDG8836

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 140cm /55" : Length 40.4cm : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 4 remaining -12/09/2022

Price: £51.60/$64.50 (Including VAT at 20%)

Code 83 DCC No 8 Double Slip

Code 83 DCC No 8 Double Slip

Ref: SDG8896

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Sorry - sold out

Price: £66.00/$82.50 (Including VAT at 20%)

Scalelink |  `HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)