Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Cocker Spaniel - sitting

Cocker Spaniel - sitting

£2.00/$2.50


find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/$5.25

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Romford 16.5mm axle with flat for grub screw (1/8" diameter)

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track. Includes two brass fixing nuts Slotted for improved grub screw location.

For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

6 x Threaded crankpins & slotted retainers

£9.00/$11.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£2.00/$2.50

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

ONLY AVAILABLE WITH AN ORDER FOR OUR DRIVING WHEELS,
find out more

Farm or Cart Horse

Farm or Cart Horse

£6.50/$8.13


find out more

Plated steel pick-up wire - 4 feet

£1.44/$1.80

Spring wire.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£3.00/$3.75

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains an etch of 2 pick-ups, usually sufficient for one locomotive.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

`HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)

Scalelink |  `HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)

Page:   <<   <  1  2  3   >   >>   View All (28) Page:   <<   <  1  2  3   >   >>   View All (28)

Code 83 DCC No 7 Curved Turnout - Right

Code 83 DCC No 7 Curved Turnout - Right

Ref: SDG8895

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 711mm/610mm (28"/24") Length 352mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 16 remaining -12/09/2022

For manual operation see SDG651 in Shinohara accessories

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 7.5 Curved Turnout - Left

Code 83 DCC No 7.5 Curved Turnout - Left

Ref: SDG8888

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £39.00/$48.75 (Including VAT at 20%)

Code 83 DCC No 7.5 Curved Turnout - Right

Code 83 DCC No 7.5 Curved Turnout - Right

Ref: SDG8889

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 813mm/711mm (32"/28") Length 413mm across inner curve

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 6 remaining -12/09/2022

Price: £39.00/$48.75 (Including VAT at 20%)

Code 83 DCC No 8 Turnout - Left

Code 83 DCC No 8 Turnout - Left

Ref: SDG8805

They are on the way from Japan- New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £29.40/$36.75 (Including VAT at 20%)

Code 83 DCC No 8 Turnout - Right

Code 83 DCC No 8 Turnout - Right

Ref: SDG8806

They are on the way from Japan- New production - new Prices

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £29.40/$36.75 (Including VAT at 20%)

Code 83 DCC No 8 Curved Turnout - Left

Code 83 DCC No 8 Curved Turnout - Left

Ref: SDG8828

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 11 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 8 Curved Turnout - Left

Code 83 DCC No 8 Curved Turnout - Left

Ref: SDG8828-SH

NOTE: This turnout is NOT ok for small parcel post - select Tracked 48 at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

This pre-owned turnout has been'"rusted" with track-colour paint except the top surface.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 available

Price: £20.00/$25.00

Code 83 DCC No 8 Curved Turnout - Right

Code 83 DCC No 8 Curved Turnout - Right

Ref: SDG8829

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 2 remaining -12/09/2022

Price: £36.00/$45.00 (Including VAT at 20%)

Code 83 DCC No 8 Curved turnout - Right

Code 83 DCC No 8 Curved turnout - Right

Ref: SDG8829-SH

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

This turnout has been'"rusted" with track-colour paint except the top surface.

Radii 91.4cm/81.3cm 36"/32" : Length across inside curve 489mm /19.25" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 available

Price: £20.00/$25.00

Code 83 DCC No 10 Turnout - Left

Code 83 DCC No 10 Turnout - Left

Ref: SDG8884

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 198mm /78"

Only 5 remaining -12/09/2022

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £28.80/$36.00 (Including VAT at 20%)

Code 83 DCC No 10 Turnout Right

Code 83 DCC No 10 Turnout Right

Ref: SDG8885

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 198mm /78"

Only 5 remaining -12/09/2022

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £28.80/$36.00 (Including VAT at 20%)

Code 83 DCC Three-way turnout

Code 83 DCC Three-way turnout

Ref: SDG8808

They are on the way from Japan- New production - new Prices

NOTE: This turnout is NOT ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 66/87cm / 26/34" : Length 30.8cm / 12.12" : Left frog 9.30 degrees / Right frog 8.10 degrees

ALL GONE

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Price: £44.26/$55.33 (Including VAT at 20%)

Scalelink |  `HO/OO' Code 83 Shinohara DCC-ready Pointwork (16.5mm gauge)