Product Sections
Main Pages
Best Sellers
25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.
Set of 25 retainers for standard crankpins..
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS'Ogee' guttering and clips
6 x 70mm x 4mm lengths plus 6 x jointing clips.
(Cheneau et agrafes - Dachrinne)'Ogee' guttering accessories
Stop ends x 4 pairs, Swan necks x 2, Internal corner x 2, Hopper x 1, External corner x 4
(Pieces pour chenaux et descentes - ????)2mm (0.80") diameter plastic rod for SLC070B
NOTE: POSTAGE £7.50 + VAT as this is 36cm long unless cut.
find out more
6 x Threaded crankpins & slotted retainers
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS6 x Crank pins for driving wheels
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.SEE EBAY LISTING = MAX 5 Packs per Customer.RESTRICTED TO 5 PACKS PER CUSTOMER.Etched de-insulating pick-ups for Scale Link Driving Wheels x 6
15mm/12-spoke Driving wheel x 1
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2010Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0THESE WHEELS ARE SOLD SINGLY20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1
This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more
Code 70 No 8 Turnout Left-hand
NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout. Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.
Customers outside the UK can only receive track by International standard parcel unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shippingRadius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degreesUse SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.Only 5 remaining -12/09/2022
