Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS find out more
25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.
£4.80/$6.00
Set of 25 retainers for standard crankpins..
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS find out more
Etched de-insulating pick-ups for Scale Link Driving Wheels x 6
£6.90/$8.63
Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.Fitting & Cutting instructions are included.Pack contains6 pick-ups, usually sufficient for two or three locomotives.. find out more
6 x Crank pins for driving wheels
£7.20/$9.00
Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.
NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS find out more
4 x Threaded crankpins & slotted retainers.
£6.50/$8.13
Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.
ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS find out more
1:43 Leyland Tiger Single deck bus with ECW body
£75.00/$93.75
We have produced a new kit of this iconic bus.
They are available to order now - delivery from 25th May 2025..For shipping you must select "Small boxed kits" or we cannot supply.International shipping = e-mail for shipping costsPicture of model arriving shortly. find out more
21mm/17-spoke driving wheel x 1
£4.80/$6.00
Produced by Scale Link/LSL with an ABS centre and nickled tyre.
Designed for use with Romford axles. Released: JULY 2011Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0THESE WHEELS ARE SOLD SINGLY find out more
14mm Bogie wheels - 12-spoke
£4.86/$6.08
ABS centres, nickel tyres,
Bogie = 20mm Blind 2mm axlePrice is for one axle with 2 wheels 3 feet 6 inches in 00 121.8cm in H0 find out more
MG 'TC' Wheels - set of 5
£20.95/$26.19
Cast 24mm wheel, 30mm x 5mm tyre, pack of 5
Etched spokes - these wheels are in kit form to be assembled. find out more