Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/€6.21

Available again.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.68/€5.38

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/€6.90

NEW STOCK - NEW PRICE
find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/€5.59

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£1.98/€2.28

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

£4.80/€5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

£4.20/€4.83

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Accessory Packs for scratchbuiders

Scalelink | WW1 1:32 scale / Grande Guerre |  Accessory Packs for scratchbuiders

Motor-cycle wheelsets x 2.

Motor-cycle wheelsets x 2.

Ref: SMB/VP01

Set of 4 wheel castings & 4 hubs + etched spokes as used in SMEB/VK02/3

Price: £9.60/€11.04 (Including VAT at 20%)

Lorry light set plus bulb horn.

Lorry light set plus bulb horn.

Ref: SMB/VP02

2 Headlamps, rims & lens, 2 Sidelamps & lens, 1 Rear light & red lens + a horn.

Price: £9.60/€11.04 (Including VAT at 20%)

Lorry wheelset

Lorry wheelset

Ref: SMB/VP03

2 front & 2 rear wheels.

Price: £12.00/€13.80 (Including VAT at 20%)

Rolls-Royce spoked-wheelset.

Rolls-Royce spoked-wheelset.

Ref: SMB/VP04

Cast hubs, brakedrums, tyres & etched spokes

Price: £30.00/€34.50 (Including VAT at 20%)

Rolls-Royce 1920's disc-wheelset

Rolls-Royce 1920's disc-wheelset

Ref: SMB/VP05

Front, Rear & Spare wheels

Price: £26.40/€30.36 (Including VAT at 20%)

Female conversion kit

Female conversion kit

Ref: SMB/VP06

This kit contains 2 x sponsons, 3 x Lewis guns, 3 x Hotchkiss 'MG' s, Gun mounts, 2 bulkheads, 28 spuds, 3 sets of transfers with serial numbers, unit marks and female tank names plus a set of instructions.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £36.00/€41.40 (Including VAT at 20%)

Scalelink | WW1 1:32 scale / Grande Guerre |  Accessory Packs for scratchbuiders