Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

£4.80/$6.00

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

'Ogee' guttering and clips

'Ogee' guttering and clips

£7.80/$9.75

6 x 70mm x 4mm lengths plus 6 x jointing clips.

(Cheneau et agrafes - Dachrinne)


find out more

'Ogee' guttering accessories

'Ogee' guttering accessories

£7.80/$9.75

Stop ends x 4 pairs, Swan necks x 2, Internal corner x 2, Hopper x 1, External corner x 4

(Pieces pour chenaux et descentes - ????)


find out more

2mm (0.80") diameter plastic rod for SLC070B

2mm (0.80

£1.20/$1.50

NOTE: POSTAGE £7.50 + VAT as this is 36cm long unless cut.
find out more

6 x Threaded crankpins & slotted retainers

£9.00/$11.25

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

SEE EBAY LISTING = MAX 5 Packs per Customer.

RESTRICTED TO 5 PACKS PER CUSTOMER.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

£9.00/$11.25

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains a fret of 6 pick-ups, usually sufficient for two or three locomotives..
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£13.00/$16.25

This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

Code 70 No 8 Turnout Left-hand

Code 70 No 8 Turnout Left-hand

£21.60/$27.00

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

Only 5 remaining -12/09/2022
find out more

1:76 scale Midland Red Transfers & Accessories

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  | 1:76 scale Midland Red Transfers & Accessories

Page:  1  2  3  4   >   >>   View All (46) Page:  1  2  3  4   >   >>   View All (46)

BMMO Radiator - Standard

BMMO Radiator - Standard

Ref: WTSP00

As used in Kit WTP08

Price: £1.50/$1.88 (Including VAT at 20%)

BMMO Radiator - SOS in inverted triangle

BMMO Radiator - SOS in inverted triangle

Ref: WTSP01

As used on SOS `FEDD' 1938

Price: £1.50/$1.88 (Including VAT at 20%)

BMMO Radiator - ReD imposed over MidlanD

BMMO Radiator - ReD imposed over MidlanD

Ref: WTSP02

As used on SOS `FEDD' 1935

Price: £1.50/$1.88 (Including VAT at 20%)

BMMO Radiator - SOS in inverted triangle

BMMO Radiator - SOS in inverted triangle

Ref: WTSP03

As used on SOS `SON'

Price: £1.50/$1.88 (Including VAT at 20%)

BMMO Radiator - 1934 on-type

BMMO Radiator - 1934 on-type

Ref: WTSP03A

As used in kit WTP02

Price: £1.50/$1.88 (Including VAT at 20%)

Road-wheel set. 2 Front + 4 Rear.

Road-wheel set. 2 Front + 4 Rear.

Ref: WTSP04

As used in kits WTP01/2/3/4/5/9/10

Price: £3.60/$4.50 (Including VAT at 20%)

Road-wheel set. 2 Front + 2 Rear

Road-wheel set. 2 Front + 2 Rear

Ref: WTSP05

As used in WTP08

Price: £3.60/$4.50 (Including VAT at 20%)

Transfer set 1938 FEDD

Transfer set 1938 FEDD

Ref: WTSP06

Contains 2 registration numbers, 2 Belt crests & 2 Fleetnames of equal length.

Price: £3.00/$3.75 (Including VAT at 20%)

Transfer set 1935 FEDD

Transfer set 1935 FEDD

Ref: WTSP07

Contains 2 Registration numbers, 2 Belt crests & 2 Fleetnames of unequal lengths.

Price: £3.00/$3.75 (Including VAT at 20%)

Transfer set 1934 SOS-ON

Transfer set 1934 SOS-ON

Ref: WTSP08

Contains 2 Belt crests & 2 Fleetnames of unequal lengths, plus Number Plates.

Price: £3.00/$3.75 (Including VAT at 20%)

Transfer set 1925 Standard

Transfer set 1925 Standard

Ref: WTSP09

Contains 2 pairs of Registration plates & 2 Fleetnames

Price: £3.00/$3.75 (Including VAT at 20%)

Transfer set 1928 QL

Transfer set 1928 QL

Ref: WTSP10

2 Fleetnames & 2 Belt crests

Price: £3.00/$3.75 (Including VAT at 20%)

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  | 1:76 scale Midland Red Transfers & Accessories