Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/€6.21

Available again.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/€6.90

NEW STOCK - NEW PRICE
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.68/€5.38

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

£4.80/€5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£1.98/€2.28

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/€5.59

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

1:76 scale Loco/Coach Fittings & Lever Control Systems

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  |  1:76 scale Loco/Coach Fittings & Lever Control Systems

Show First 12 Product(s) Show First 12 Product(s)

Steam Locomotive Vacuum Pipes

Steam Locomotive Vacuum Pipes

Ref: WPY27

Pack of 6 with Brass plated hoses.

Retail only - NOT available to the trade.

Price: £5.40/€6.21 (Including VAT at 20%)

Diesel Locomotive Vacuum Pipes

Diesel Locomotive Vacuum Pipes

Ref: WPY28

Pack of 6 with Brass plated hoses.

Retail only - NOT available to the trade.

Price: £5.40/€6.21 (Including VAT at 20%)

Train Heating Pipes

Train Heating Pipes

Ref: WPY29

Pack of 6 with Brass plated hoses.

Retail only - NOT available to the trade.

Price: £5.40/€6.21 (Including VAT at 20%)

Flexible Control Tubing

Flexible Control Tubing

Ref: WPY30

Discontinued.

Price: £3.00/€3.45 (Including VAT at 20%)

G.W.R. Head codes and frame

G.W.R. Head codes and frame

Ref: WPY37

A cast frame with 18 codes supplied.

Price: £3.00/€3.45 (Including VAT at 20%)

Double slide bar crossheads

Double slide bar crossheads

Ref: WPY38

Pack of 4 White metal castings.

Price: £1.80/€2.07 (Including VAT at 20%)

G.W.R. Four Cylinder valve gear set

G.W.R. Four Cylinder valve gear set

Ref: WPY39

To suit King, Castle, Star. (No cylinders).

Price: £7.80/€8.97 (Including VAT at 20%)

Double slide bar supports

Double slide bar supports

Ref: WPY40

Pack of 4 castings, 2 each LH and RH.

Price: £1.80/€2.07 (Including VAT at 20%)

Handrail Knobs x 20 and 4 feet of wire

Handrail Knobs x 20 and 4 feet of wire

Ref: WPY42

24 short, turned Brass knobs and roll of wire.

Price: £9.00/€10.35 (Including VAT at 20%)

G.W.R. 2 Cylinder valve gear set

G.W.R. 2 Cylinder valve gear set

Ref: WPY44

To set Hall, Grange, Manor, (inc. cylinders).

Price: £9.60/€11.04 (Including VAT at 20%)

G.W.R. Two Safety Valves

G.W.R. Two Safety Valves

Ref: WPY52

With top feed for King, Hall, etc.

Price: £1.56/€1.79 (Including VAT at 20%)

Handrail knobs - Short x 20

Handrail knobs - Short x 20

Ref: WPY55

1mm ball - 1.6mm length

(Retail only - NOT AVAILABLE TO TRADERS)

Price: £7.80/€8.97 (Including VAT at 20%)

Handrail knobs - Long x 20

Handrail knobs - Long x 20

Ref: WPY56

1mm ball - 3.0mm Length

(Retail only - NOT AVAILABLE TO TRADERS)

Price: £7.80/€8.97 (Including VAT at 20%)

4 Brass Coach Buffers - Oval (not sprung) 00-scale

4 Brass Coach Buffers - Oval (not sprung) 00-scale

Ref: WPY74

These are solid brass oval coach buffers

Price: £3.60/€4.14 (Including VAT at 20%)

4 Brass Coach Buffers - Round (not sprung) 00-scale

4 Brass Coach Buffers - Round (not sprung) 00-scale

Ref: WPY75

These are solid brass round coach buffers

Price: £3.60/€4.14 (Including VAT at 20%)

4 Cast whitemetal Buffers (not sprung) 00

4 Cast whitemetal Buffers (not sprung) 00

Ref: WPY77

These are whitemetal round buffers, suitable for steam locomotives..

Price: £3.00/€3.45 (Including VAT at 20%)

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  |  1:76 scale Loco/Coach Fittings & Lever Control Systems