Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford Axle-nut screwdriver

Romford Axle-nut screwdriver

£5.40/€6.21

Available again.
find out more

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

£1.80/€2.07

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.25/€8.34

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Romford De-luxe crankpins with bushes and 14BA nuts.
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/€2.28

MRAX/OO 1/8" diameter axle for 16.5mm track.

Includes two brass fixing nuts.

For spacing washers see WPY33
find out more

Markits DeLuxe Crankpin sets (6)

Markits DeLuxe Crankpin sets (6)

£6.00/€6.90

NEW STOCK - NEW PRICE
find out more

14mm Bogie wheels - 12-spoke

14mm Bogie wheels - 12-spoke

£4.68/€5.38

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

3 feet 6 inches in 00 121.8cm in H0
find out more

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

£4.80/€5.52

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY


find out more

Romford 16.5mm axle for OLDER Triang-Hornby chassis

Romford 16.5mm axle for OLDER Triang-Hornby chassis

£1.98/€2.28

This is 9/64th diameter axle for Triang/Hornby chassis with knurled gear-wheel grip for16.5mm track.

Includes two brass fixing nuts
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.56/€5.24

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

16mm Bogie wheels - 12-spoke

16mm Bogie wheels - 12-spoke

£4.86/€5.59

ABS centres, nickel tyres,

Bogie = 20mm Blind 2mm axle

Price is for one axle with 2 wheels

4 feet in 00 139.2cm in H0


find out more

1:76 scale Light Commercial KITS

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  | 1:76 scale Light Commercial KITS

Show First 12 Product(s) Show First 12 Product(s)

Morris Minor pick up truck

Morris Minor pick up truck

Ref: WTA01

Based on the vehicle manufactored during the early nineteen fifties. Six part kit.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

Morris 1000 panel van

Morris 1000 panel van

Ref: WTA02

This is the later version of the Minor from the 1970s. Also a six part kit.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

NCB electric vehicle

NCB electric vehicle

Ref: WTA03

This sixteen part kit is supplied with sufficient pieces to produce a 1930-1950's milk float

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.60/€14.49 (Including VAT at 20%)

Morris commercial LD20 van

Morris commercial LD20 van

Ref: WTA04

A 30 cwt vehicle with sliding doors from the mid 1950s. Used by several bus companies, Royal Mail and small firms.

A 21 part kit.

SOLD OUT

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.60/€14.49 (Including VAT at 20%)

1920s industrial tractor

1920s industrial tractor

Ref: WTA05

With it's enclosed engine, the prototype was extensively used in factories and works yards. A 12 part kit.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

Trojan van with Luton type body

Trojan van with Luton type body

Ref: WTA06

Another from the mid 1950s this popular vehicle was used by several fleet operators, e.g. Brooke Bond teas.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.60/€14.49 (Including VAT at 20%)

Austin FX3 taxi cab

Austin FX3 taxi cab

Ref: WTA07

A one piece body plus chassis and wheels makes this six part kit ideal for newcomers to White metal modeling.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.60/€14.49 (Including VAT at 20%)

Morris J4 Pick-up

Morris J4 Pick-up

Ref: WTA08

Pick up truck. 1965.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £12.60/€14.49 (Including VAT at 20%)

Morris Minor Traveller

Morris Minor Traveller

Ref: WTA09

1955 (Woodie).

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

Morris Minor Van

Morris Minor Van

Ref: WTA10

Royal Mail, including transfers. 1955.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

Royal Mail Transfers

Royal Mail Transfers

Ref: WTA10T

Price: £1.98/€2.28 (Including VAT at 20%)

Commer 8cwt Van

Commer 8cwt Van

Ref: WTA11

8cwt delivery van. 1955.

Three were used by MidlanD ReD by the publicity department.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £10.80/€12.42 (Including VAT at 20%)

Karrier/Commer 'Yorkshire' Road-sweeper-cleaner

Karrier/Commer 'Yorkshire' Road-sweeper-cleaner

Ref: WTD02

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Price: £22.32/€25.67 (Including VAT at 20%)

Scalelink | W & T Manufacturing (B'ham) 1:32 - 1:160  | 1:76 scale Light Commercial KITS