Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL8 x 1

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

£60.00/$75.00

This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels

BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).

Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Rover 6hp tourer 1906

Rover 6hp tourer 1906

£18.00/$22.50

(6cv torpedo - Kabriolett)

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs


find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

20mm 00/H0 Driving wheels x 2 + 16.5mm axle x 1

£11.10/$13.88

This pack contains 2 x 20mm Scale Link Driving Wheels & 1x Romford/Markits 00/H0 axle.
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Hanazono 12 volt motor bogie 26.0mm wheelbase

Hanazono 12 volt motor bogie 26.0mm wheelbase

£46.80/$58.50

Fitted with 12.0mm disc wheels.

BODY size:- Length=35.75mm x Width=14.35mm x Height=15.30mm (above rails)

These units must have weight applied to operate successfully.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins

Show First 12 Product(s) Show First 12 Product(s)

Etched de-insulating pick-ups for Scale Link Driving Wheels

Etched de-insulating pick-ups for Scale Link Driving Wheels

Ref: SWD1

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains 2 pick-ups, usually sufficient for one locomotive.

Price: £2.40/$3.00 (Including VAT at 20%)

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Etched de-insulating pick-ups for Scale Link Driving Wheels x 6

Ref: SWD1-6

Specially designed for use with our driving wheels, these etched pick-ups can be fitted to all the sizes we produce.

Fitting & Cutting instructions are included.

Pack contains6 pick-ups, usually sufficient for two or three locomotives..

Price: £6.90/$8.63 (Including VAT at 20%)

12mm/12-spoke Driving wheel x 1

12mm/12-spoke Driving wheel x 1

Ref: SW1212D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 12mm. 3 feet in 00 - 104.4cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

13mm/12-spoke Driving wheel x 1

13mm/12-spoke Driving wheel x 1

Ref: SW1312D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 13mm. 3 feet 3 inches in 00 113.1 cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke Driving wheel x 1

14mm/12-spoke Driving wheel x 1

Ref: SW1412D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 14mm. 3 feet 6 inches in 00 121.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

14mm/12-spoke GROOVED Driving wheel x 1

14mm/12-spoke GROOVED Driving wheel x 1

Ref: SW1412DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Details as SW1412D above but tyre grooved to take rubber tyre

Diameter of drum is 14mm.

THESE WHEELS ARE SOLD SINGLY

Price: £4.32/$5.40 (Including VAT at 20%)

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

Ref: SW1512D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £3.96/$4.95 (Including VAT at 20%)

16mm /12-spoke driving wheel x 1

16mm /12-spoke driving wheel x 1

Ref: SW1612D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010.

Diameter of drum is 16mm. 4 feet in 00 139.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

17mm/12-spoke driving wheel x 1

17mm/12-spoke driving wheel x 1

Ref: SW1712D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Release: JUNE 2020.

Diameter of drum is 17mm. 4 feet 3 inches in 00 147.9cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke driving wheel x 1

18mm/16-spoke driving wheel x 1

Ref: SW1816D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 18mm. 4 feet 6 inches in 00 156.6cm in H0

THEY'RE BACK!!!

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18.45mm/16-spoke driving wheel x 1

18.45mm/16-spoke driving wheel x 1

Ref: SW1816DX

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: March 2018

Diameter of drum is 18.45mm. 4 feet 7 1/2 inches in 00 160.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.20/$5.25 (Including VAT at 20%)

18mm/16-spoke GROOVED driving wheel x 1

18mm/16-spoke GROOVED driving wheel x 1

Ref: SW1816DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

With groove for fitting a traction tyre - Diameter of drum is 18mm.

THESE WHEELS ARE CURRENTLY UNAVAILABLE

Price: £4.56/$5.70 (Including VAT at 20%)

19mm/16-spoke driving wheel x 1

19mm/16-spoke driving wheel x 1

Ref: SW1916D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles.

Diameter of drum is 19mm. 4 feet 9 inches in 00 165.3cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

20mm/17-spoke driving wheel x 1

20mm/17-spoke driving wheel x 1

Ref: SW2017D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 20mm. 5 feet 0 inches in 00 174cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

20mm/17-spoke GROOVED driving wheel x 1

20mm/17-spoke GROOVED driving wheel x 1

Ref: SW2017DA

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Details as SW2017 above but tyre grooved to take rubber tyre

Diameter of drum is 20mm.

THESE WHEELS ARE SOLD SINGLY

WITHDRAWN

Price: £5.10/$6.38 (Including VAT at 20%)

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

Ref: SW2117D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

22mm/18-spoke Driving wheel x 1

22mm/18-spoke Driving wheel x 1

Ref: SW2218D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 22mm. 5 feet 6 inches in 00 191.4cm in H0

THESE WHEELS ARE SOLD

SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

23mm/18-spoke Driving wheel x 1

23mm/18-spoke Driving wheel x 1

Ref: SW2318D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 23mm. 5 feet 9 inches in 00 200cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £4.80/$6.00 (Including VAT at 20%)

24mm/18-spoke Driving wheel x 1

24mm/18-spoke Driving wheel x 1

Ref: SW2418D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 24mm. 6 feet in 00 208.8cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

25mm/18-spoke Driving wheel x 1

25mm/18-spoke Driving wheel x 1

Ref: SW2518D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: APRIL 2014

Diameter of drum is 25mm. 6 feet 3 inches in 00 217.5cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

26mm/20-spoke Driving wheel x 1

26mm/20-spoke Driving wheel x 1

Ref: SW2620D

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JUNE 2013

Diameter of drum is 26mm. 6 feet 6 inches in 00 226.2cm in H0

THESE WHEELS ARE SOLD SINGLY

Price: £5.10/$6.38 (Including VAT at 20%)

Markits 32mm / 24-spoke insulated driving wheel x 1

Markits 32mm / 24-spoke insulated driving wheel x 1

Ref: MR32-24I

This the 8-foot driver with insulated rim. Use with MR32-24P.

Diameter of drum is 32mm 8 feet in 00 278.4cm in H0

Price: £6.30/$7.88 (Including VAT at 20%)

Markits 32mm / 24-spoke non-insulated driving wheel x 1

Markits 32mm / 24-spoke non-insulated driving wheel x 1

Ref: MR32-24P

This the 8-foot driver with non-insulated rim. Use with MR32-24I.

Diameter of drum is 32mm

Price: £6.30/$7.88 (Including VAT at 20%)

Markits 32mm / 24-spoke driving wheels x 1 set

Markits 32mm / 24-spoke driving wheels x 1 set

Ref: MR32set

A set comprises one insulated and one non-insulated wheel plus one standard 16.5mm 1/8" axle.

{MR32-24I plus MR32-24P plus RMA165}

Price: £15.00/$18.75 (Including VAT at 20%)

Plated steel pick-up wire - 4 feet

Plated steel pick-up wire - 4 feet

Ref: BPW02

Spring wire.

Price: £1.44/$1.80 (Including VAT at 20%)

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

Ref: WPY41

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £7.20/$9.00 (Including VAT at 20%)

8 x Crank pins for driving wheels

8 x Crank pins for driving wheels

Ref: WPY41A

Set of 8 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £9.60/$12.00 (Including VAT at 20%)

24 x Crank pins for driving wheels

24 x Crank pins for driving wheels

Ref: WPY41B

Set of 24 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £27.00/$33.75 (Including VAT at 20%)

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

25 x Crankpin fixing washers for WPY41, 41A, 41B cranklpins.

Ref: WPY41C

Set of 25 retainers for standard crankpins..

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £4.80/$6.00 (Including VAT at 20%)

6 x Threaded crankpins & slotted retainers

6 x Threaded crankpins & slotted retainers

Ref: WPY41D

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £9.00/$11.25 (Including VAT at 20%)

24 x Threaded crankpins & slotted retainers.

24 x Threaded crankpins & slotted retainers.

Ref: WPY41E

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £33.00/$41.25 (Including VAT at 20%)

4 x Threaded crankpins & slotted retainers.

4 x Threaded crankpins & slotted retainers.

Ref: WPY41F

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS

Price: £6.50/$8.13 (Including VAT at 20%)

Scalelink |  OO/HO Scale Link Locomotive Driving Wheels & W&T crankpins