Scalelink

Site MapContact Us

Product Sections

Main Pages

Best Sellers

Romford 16.5mm Axle (1/8" diameter)

Romford 16.5mm Axle (1/8

£1.98/$2.48

MRAX/OO 1/8" diameter axle for 16.5mm track.Includes two brass fixing nuts. For spacing washers see WPY33

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 6 wheels = 3 axles

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

4 x Threaded crankpins & slotted retainers.

£6.50/$8.13

Standard 10BA thread for the driving wheel & 14BA threaded retainer. a de-luxe crankpin set.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

Tenshodo 12 volt CORELESS motor-bogie 24.5mm wheelbase-DISC

£60.00/$75.00

This is a brand-new product from Tenshodo and is fitted with 10.5mm disk wheels

BODY size:- Length=38.00mm x Width=19.00mm (max) x Height=15.00mm (above rail).

Japanese mounting instructions are included with 3 x 14 gram weights & 2 brackets.

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs
find out more

Rover 6hp tourer 1906

Rover 6hp tourer 1906

£18.00/$22.50

(6cv torpedo - Kabriolett)

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs


find out more

1:43 Leyland Tiger Single deck bus with ECW body

1:43 Leyland Tiger Single deck bus with ECW body

£75.00/$93.75

We have produced a new kit of this iconic bus.

They are available to order now - delivery from 25th May 2025..

For shipping you must select "Small boxed kits" or we cannot supply.

International shipping = e-mail for shipping costs

Picture of model arriving shortly.
find out more

6 x Crank pins for driving wheels

6 x Crank pins for driving wheels

£7.20/$9.00

Set of 6 with retainers for 10BA tapped hole or for self-tapping into OUR wheels.

NOTE: Extreme care must be taken if soldering the retainer onto the crank-pin as heat can damage the wheel centre.

Inexperienced modellers should use Markits/Romford De-luxe crankpins with bushes and 14BA nuts.

ONLY AVAILABLE WITH THE PURCHASE OF SCALE LINK DRIVING WHEELS
find out more

21mm/17-spoke driving wheel x 1

21mm/17-spoke driving wheel x 1

£4.80/$6.00

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2011

Diameter of drum is 21mm. 5 feet 3 inches in 00 182.7cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Markits DeLuxe Crankpin sets (8)

Markits DeLuxe Crankpin sets (8)

£7.94/$9.93

NEW STOCK - NEW PRICE

Owing to the current closure of Markits, following Mark's death, we are currently only supplying

these components commensurate with a purchase of Scale Link wheels. i.e. 8 wheels = MCRNKPDL8 x 1

When the future of Markits is known, we will review the situation.

Orders received without the appropriate quantity of Scale Link wheels will currently not be supplied.
find out more

15mm/12-spoke Driving wheel x 1

15mm/12-spoke Driving wheel x 1

£3.96/$4.95

Produced by Scale Link/LSL with an ABS centre and nickled tyre.

Designed for use with Romford axles. Released: JULY 2010

Diameter of drum is 15mm. 3 feet 9 inches in 00 130.5cm in H0

THESE WHEELS ARE SOLD SINGLY
find out more

Hanazono 12 volt DC 5-pole motor

Hanazono 12 volt DC 5-pole motor

£18.00/$22.50

This is the Hanazono 1024, 5-pole, 12v DC open-frame motor supplied with 2 mounting screws M1.4 x 2mm

Body size is 24mm x 15mm x 10mm. Doubl-ended suits MM210 gearbox. Shaft is 1.5mm in diameter.

Fixings 10mm apart.
find out more

HO/OO' Code 70 IMON Track & Shinohara Pointwork

Scalelink |  HO/OO' Code 70 IMON Track & Shinohara Pointwork

Page:   <<   <  1  2  3   >   >>   View All (25) Page:   <<   <  1  2  3   >   >>   View All (25)

Code 70 No 8 Turnout Right-hand

Code 70 No 8 Turnout Right-hand

Ref: SDG306

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radius 168cm / 66" : Length 37.5cm / 14.75" : Frog 7.09 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 12 remaining -12/09/2022

Price: £21.60/$27.00 (Including VAT at 20%)

Code 70 No 4 Y-point

Code 70 No 4 Y-point

Ref: SDG307

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 4 remaining -12/09/2022

Price: £19.80/$24.75 (Including VAT at 20%)

Code 70 No 6 3-way point

Code 70 No 6 3-way point

Ref: SDG308

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 66/87cm / 26/34" : Length 30.8cm / 12.12" : Left frog 9.30 degrees / Right frog 8.10 degrees£24.25 =

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £42.00/$52.50 (Including VAT at 20%)

Code 70 No 6 Double crossover

Code 70 No 6 Double crossover

Ref: SDG312

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 49cm / 19.3" : Frog 9.30 degrees :

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 6 remaining -12/09/2022

Price: £66.00/$82.50 (Including VAT at 20%)

Code 70 No 6 Double slip

Code 70 No 6 Double slip

Ref: SDG314

NOTE: This turnout is NOTok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Length 45cm / 17.71"

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -12/09/2022

Price: £66.00/$82.50 (Including VAT at 20%)

Code 70 No 6 Curved Left-hand

Code 70 No 6 Curved Left-hand

Ref: SDG326

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining -26/11/2020

Price: £30.00/$37.50 (Including VAT at 20%)

Code 70 No 6 Curved Right-hand

Code 70 No 6 Curved Right-hand

Ref: SDG327

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Radii 61cm/51cm 24"/20" ; Inside curve length 33.8cm / 13.3" : Frog 9.30 degrees

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 3 remaining -12/09/2022

Price: £33.00/$41.25 (Including VAT at 20%)

Code 70 Diamond crossing - 30 degree

Code 70 Diamond crossing - 30 degree

Ref: SDG330

Sorry - sold out

Price: £19.20/$24.00 (Including VAT at 20%)

Code 70 Diamond crossing - 45 degree

Code 70 Diamond crossing - 45 degree

Ref: SDG331

Only 10 remaining -12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

Code 70 Diamond crossing - 60 degree

Code 70 Diamond crossing - 60 degree

Ref: SDG332

Only 11 remaining -12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

Code 70 Diamond crossing - 90 degree

Code 70 Diamond crossing - 90 degree

Ref: SDG333

Only 1 remaining -12/09/2022

Price: £19.20/$24.00 (Including VAT at 20%)

Code 70 No 8 Curvable Turnout Left-hand

Code 70 No 8 Curvable Turnout Left-hand

Ref: SDG328

NOTE: This turnout is ok for small parcel post - select SHINOHARA TURNOUTS & CROSSING at the checkout.

Standard postal rates do NOT apply - If you purchase track as well select FLEXI-TRACK PLUS.

Customers outside the UK can only receive track by International standard parcel

unless the track is cut down to 900mm lengths. SELECT FLEXI-TRACK in shipping

Use SHINOHARA SDG650 Point motor OR any SELF-LATCHING point-motor.

For manual operation see SDG651 in Shinohara accessories

Only 1 remaining -26/11/2020

Price: £27.60/$34.50 (Including VAT at 20%)

Scalelink |  HO/OO' Code 70 IMON Track & Shinohara Pointwork